Engine Front Support
Usage:
Remove & Install Engine Front Support
Start By:
a. remove vibration damper and pulley
1. Loosen two generator mount bolts (2).
2. Attach a hoist to the front engine lifting eye and remove two front engine mount bolts (3).
3. Remove two front engine mount bolts (3).
4. Use the hoist to remove the weight of the engine from the engine front support. The weight of the engine is approximately 1300 kg (2867 lb).
5. Remove eight bolts (1) and remove engine front support (4).
NOTE: The following steps are for the installation of the engine front support.
6. Put engine front support (4) in position and install bolts (3).
7. Lower the engine into position and install bolts (3).
8. Remove the hoist and tighten bolts (2).
End By:
a. install vibration damper and pulley
Caterpillar Information System:
3406C GENERATOR SET ENGINE Vibration Damper & Pulley
3406C GENERATOR SET ENGINE Fan Drive
3406C GENERATOR SET ENGINE Water Pump
3406C GENERATOR SET ENGINE Exhaust Manifold
3406C GENERATOR SET ENGINE Oil Filter Base
3406C GENERATOR SET ENGINE Oil Filter & Base
3406C GENERATOR SET ENGINE Engine Oil Cooler
3406C GENERATOR SET ENGINE Water Temperature Regulator
3406C GENERATOR SET ENGINE Turbocharger
3406C GENERATOR SET ENGINE Electric Starting Motor
3406C GENERATOR SET ENGINE Fuel Injection Line Adapters
3406C GENERATOR SET ENGINE Valve Covers
3406C GENERATOR SET ENGINE Timing Gear Cover
3406C GENERATOR SET ENGINE Timing Gears & Plate
3406C GENERATOR SET ENGINE Accessory Drive
3406C GENERATOR SET ENGINE Rocker Shaft Assemblies & Push Rods
3406C GENERATOR SET ENGINE Rocker Shaft Assemblies
3406C GENERATOR SET ENGINE Valve Lifters
3406C GENERATOR SET ENGINE Fuel Injection Nozzles & Adapters
3406C GENERATOR SET ENGINE Aftercooler Core
3406C GENERATOR SET ENGINE Aftercooler Housing
3406C GENERATOR SET ENGINE Cylinder Head Assembly
3406C GENERATOR SET ENGINE Spacer Plate
3406C GENERATOR SET ENGINE Inlet & Exhaust Valves