Electric Starting Motor
Usage:
Remove & Install Electric Starting Motor
1. Disconnect the wires from the electric starting motor.
2. Fasten a hoist to the electric starting motor. Remove three bolts (1) that hold the electric starting motor to flywheel housing. Remove the electric starting motor. The weight of the electric starting motor is approximately 32 kg (71 lb).
NOTE: The following steps are for installation of the electric starting motor.
3. Fasten a hoist, and install the electric starting motor on the flywheel housing. Install the three bolts (1) that hold the electric starting motor to flywheel housing.
4. Connect the wires to the electric starting motor.
Caterpillar Information System:
3406C GENERATOR SET ENGINE Fuel Injection Line Adapters
3406C GENERATOR SET ENGINE Valve Covers
3406C GENERATOR SET ENGINE Fuel Injection Pump Housing
3406C GENERATOR SET ENGINE Fuel Injection Pumps
3406C GENERATOR SET ENGINE Governor
3406C GENERATOR SET ENGINE Fuel Injection Pump Housing & Governor
3406C GENERATOR SET ENGINE Governor & Fuel Pump Drive
3406C GENERATOR SET ENGINE Fuel Transfer Pump
3406C GENERATOR SET ENGINE Fuel Filter & Base
3406C GENERATOR SET ENGINE Fuel Injection Lines
3406C GENERATOR SET ENGINE Radiator & Radiator Guard
3406C GENERATOR SET ENGINE Radiator
3406C GENERATOR SET ENGINE Turbocharger
3406C GENERATOR SET ENGINE Water Temperature Regulator
3406C GENERATOR SET ENGINE Engine Oil Cooler
3406C GENERATOR SET ENGINE Oil Filter & Base
3406C GENERATOR SET ENGINE Oil Filter Base
3406C GENERATOR SET ENGINE Exhaust Manifold
3406C GENERATOR SET ENGINE Water Pump
3406C GENERATOR SET ENGINE Fan Drive
3406C GENERATOR SET ENGINE Vibration Damper & Pulley
3406C GENERATOR SET ENGINE Engine Front Support
3406C GENERATOR SET ENGINE Timing Gear Cover
3406C GENERATOR SET ENGINE Timing Gears & Plate