G3500 Engines Caterpillar


Gas Pressure Regulator - Install - Low Pressure

Usage:

G3508 2TJ

Installation Procedure



    Illustration 1g00600648
    Typical example

  1. Install gas pressure regulator (2) with two bolts (1) on the mounting bracket.

  2. Install two bolts (4) that hold the gas line to gas pressure regulator (2).

  3. Connect gas supply line (1).

  4. Turn on the gas supply.

End By:

  1. Install the gas pressure regulator solenoid.

Caterpillar Information System:

G3500 Engines Gas Pressure Regulator - Remove - Low Pressure
3500B Engines Air Starting Motor - Disassemble
3500B Engines Air Starting Motor - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Head - Install
G3606 and G3608 Engines Actuator (Hydrax) - Remove
G3500 Engines Gas Pressure Regulator Solenoid - Remove and Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 333 FMI 4 Alarm Module Control Voltage Below Normal - Test
G3500 Engines Fuel Control Valve - Remove and Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 333 FMI 3 Alarm Module Control Voltage Above Normal - Test
3500B Engines and 3500 Engines with EUI Option Engine Control Switch (ECS)
G3500 Engines Fuel Control Actuator - Remove and Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines CID 331 FMI 2 Switch (Engine Control) Incorrect Signal - Test
G3500 Engines Gas Pressure Regulator - Remove - High Pressure
345B Excavator and 345B Material Handler Machine System Specifications Solenoid Valve (Counterweight Control)
Electronic Modular Control Panel II (EMCP II) For PEEC Engines CID 336 FMI 2 Switch (Engine Control) Incorrect Signal - Test
G3500 Engines Gas Pressure Regulator - Install - High Pressure
Electronic Modular Control Panel II (EMCP II) For PEEC Engines CID 441 FMI 12 Oil Step Relay Failed - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install - 3003 Engine
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove - 3003 Engines
3126B Marine Engine Alternator and Regulator
G3500 Engines Gas Pressure Regulator - Disassemble
3126B Marine Engine Alternator and Regulator
G3500 Engines Gas Pressure Regulator - Assemble
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Balancer Group - 3114 Engine Only
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.