Alternator
Usage:
Remove Alternator
1. Remove auxiliary drive guard (1).
2. Disconnect wires (3), remove bolt (2) and washers, remove nut (4) and remove drive belts (6) from pulley.
3. Remove bolt, spacer (5) and alternator.
Install Alternator
1. Put the alternator (1) in position on bracket and install bolt (3) and spacer (2).
2. Install nut (4), drive belts (5), bolt and washers.
3. Make adjustment of belt deflection (movement) to 7/8" (22 mm) under 25 lb. (11.5 kg) force half way between pulleys.
4. Connect wires to alternator. Install guard for auxiliary drive.
Caterpillar Information System:
D342 INDUSTRIAL ENGINE ATTACHMENTS Safety Shutoff
D342 INDUSTRIAL ENGINE ATTACHMENTS Primary Fuel Filter
D342 INDUSTRIAL ENGINE ATTACHMENTS Alternator Regulator
D342 INDUSTRIAL ENGINE ATTACHMENTS Fan Assembly
D342 INDUSTRIAL ENGINE ATTACHMENTS Fan Drive
D342 INDUSTRIAL ENGINE ATTACHMENTS Belt Tightener
D342 INDUSTRIAL ENGINE ATTACHMENTS Fan Belts
D342 INDUSTRIAL & MARINE ENGINES Fan Drive (7L4002)
D342 INDUSTRIAL & MARINE ENGINES Auxiliary Drive
D342 INDUSTRIAL & MARINE ENGINES Governor Drive (Woodward UG-8 Governor)
D342 INDUSTRIAL & MARINE ENGINES Governor Linkage Adjustment (Woodward UG-8 Governor)
D342 INDUSTRIAL & MARINE ENGINES Safety Control Shutoff
D342 INDUSTRIAL ENGINE ATTACHMENTS Auxiliary Drive
D342 INDUSTRIAL ENGINE ATTACHMENTS Crankshaft Pulley
D342 INDUSTRIAL ENGINE ATTACHMENTS Radiator And Guard
D342 INDUSTRIAL ENGINE ATTACHMENTS Fuel Tank
D342 INDUSTRIAL ENGINE ATTACHMENTS Generator Removal
D342 INDUSTRIAL ENGINE ATTACHMENTS Generator Installation
1674 DIESEL TRUCK ENGINE Introduction
1674 DIESEL TRUCK ENGINE Fuel Injection Equipment
1674 DIESEL TRUCK ENGINE Fuel Filter And Priming Pump
1674 DIESEL TRUCK ENGINE Fuel Transfer Pump (7S4447 and 4N4874)
1674 DIESEL TRUCK ENGINE Governor (9L4815)
1674 DIESEL TRUCK ENGINE Drive For The Camshaft