PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C LOCOMOTIVE ENGINES
Usage:
TEBE0677-02
Show/hide table
| 09Dec2013 |
| (Revised 02Oct2014) |
U-615
A-425
D-504
O-515
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE BAND CLAMPS AND MOUNTING HARDWARE ON CERTAIN 3512C LOCOMOTIVE ENGINES |
|
| 1059 1071 7553 | PS44117 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44117" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 09Dec2013 (Revised 21Feb2014) Service Letter. Changes have been made to the Action Required and Service Claims Allowances. |
Show/hide table
TERMINATION DATE |
| 31Dec2015 |
PROBLEM
Show/hide table
| The RH and LH air inlet tube support bracket mounting hardware may lose clamp load. The marmon clamp on the RH and LH air inlet tube may also lose clamp load. At the factory during the assembly process the RH and LH air inlet adapter at the after cooler may have been installed missing the washers. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512C | NJT00102-00231 |
| 3512C HD | F2X00100-00293 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 4 | 0S1590 | BOLT |
| 5 | 1A2029 | BOLT |
| 8 | 5M2894 | WASHER-HARD |
| 13 | 8M9124 | WASHER-HARD |
| 2 | 3026504 | BELLOWS AS |
| 4 | 4346544 | CLAMP-V-BAND |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Refer to Engine News SEBD9923, "New V Band Clamps and Mounting Hardware Are Used on Certain 3512C Engines". |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-48 mo |
||||||
Show/hide table
| NOTE: This is a 5.5-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PRELUBE SOLENOID VALVE GROUP ON CERTAIN G3508, G3508B, G3512, G3512B, G3516, G3516B, AND G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PRELUBE SOLENOID VALVE GROUP ON CERTAIN G3508, G3508B, G3512, G3512B, G3516, G3516B, AND G3520B ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE OIL FILTER HOUSINGS ON CERTAIN C175-16 MARINE ENGINES, AND PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE OIL FILTER HOUSINGS ON CERTAIN C175-16 MARINE ENGINES, AND PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THROTTLE COOLANT SUPPLY AND RETURN LINES ON CERTAIN G3520C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THROTTLE COOLANT SUPPLY AND RETURN LINES ON CERTAIN G3520C GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING TURBOCHARGER INLET AIR TEMPERATURE SENSOR ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING TURBOCHARGER INLET AIR TEMPERATURE SENSOR ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHARGE AIR COOLER (CAC) ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 208-6270 CLAMPS ON CERTAIN G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 208-6270 CLAMPS ON CERTAIN G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C32 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C32 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE ENGINE RATING FOR CERTAIN C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECM SOFTWARE ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECM SOFTWARE ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE LABELS ON CERTAIN REMAN C-15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE LABELS ON CERTAIN REMAN C-15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE COOLING LINES ON CERTAIN G3512E, G3516, G3516E, G3520C, G3520E GENERATOR SETS, AND PMG3516C POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THROTTLE COOLING LINES ON CERTAIN G3512E, G3516, G3516E, G3520C, G3520E GENERATOR SETS, AND PMG3516C POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 358-5488 BAND CLAMP ON THE TURBO EXHAUST HOUSING ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST MANIFOLD COMPONENTS ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RECTIFIER ASSEMBLY ON CERTAIN 3516B, 3516C, AND C175-16, AND C175-20 GENERATOR SETS EQUIPPED WITH A SR5 3000 FRAME GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RECTIFIER ASSEMBLY ON CERTAIN 3516B, 3516C, AND C175-16, AND C175-20 GENERATOR SETS EQUIPPED WITH A SR5 3000 FRAME GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C7, C9.3, C13, C15, AND C18 INDUSTRIAL ENGINES INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C7, C9.3, C13, C15, AND C18 INDUSTRIAL ENGINES INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C27 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND ADDING A SENSOR ON CERTAIN C27 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SOFTWARE AND ADDING A SENSOR ON CERTAIN C27 LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SOFTWARE AND ADDING A SENSOR ON CERTAIN C27 LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CYLINDER HEADS ON CERTAIN G3512C, G3512E, G3516C, G3520C, AND G3520E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CYLINDER HEADS ON CERTAIN G3512C, G3512E, G3516C, G3520C, AND G3520E ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL MANIFOLDS AND FUEL TUBES ON CERTAIN 3512C PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL MANIFOLDS AND FUEL TUBES ON CERTAIN 3512C PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR POSSIBLY UPDATING THE EMCP4.2 SETTINGS ON CERTAIN G3406 AND G3412 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR POSSIBLY UPDATING THE EMCP4.2 SETTINGS ON CERTAIN G3406 AND G3412 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR CORRECTING THE ENGINE RATING ON CERTAIN C15 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR CORRECTING THE ENGINE RATING ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE PRESSURE INDICATOR HOSE ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE PRESSURE INDICATOR HOSE ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS