Starter
Usage:
Remove Starter
1. Disconnect the battery leads, and starter ground wire (3).
2. Disconnect the governor control linkage (1) from the governor control lever.
3. Attach a hoist and remove the starter mounting bolts (2).
4. Remove the starter-weight 65 lbs. (29,5 kg).
Install Starter
1. Using a hoist, install the starter and mounting bolts.
2. Connect the governor control linkage.
Show/hide table
NOTICE |
---|
When the governor control linkage is installed the spring tension must hold the governor control lever toward the off position. |
3. Connect the battery leads and starter ground wire.
Caterpillar Information System:
1673 DIESEL TRUCK ENGINE Hydraulic Pump Drive
1673 DIESEL TRUCK ENGINE Water Pump
1673 DIESEL TRUCK ENGINE Air Compressor
1673 DIESEL TRUCK ENGINE Oil Cooler
1673 DIESEL TRUCK ENGINE Crankshaft Main Bearings
1673 DIESEL TRUCK ENGINE Connecting Rod Bearings
1673 DIESEL TRUCK ENGINE Oil Pump
1673 DIESEL TRUCK ENGINE Oil Pan
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1673 DIESEL TRUCK ENGINE Governor
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1673 DIESEL TRUCK ENGINE Alternator And Mount
1673 DIESEL TRUCK ENGINE Fan Drive
1673 DIESEL TRUCK ENGINE Engine Front Support
1673 DIESEL TRUCK ENGINE Crankshaft Pulley And Hub
1673 DIESEL TRUCK ENGINE Crankshaft Front Seal
1673 DIESEL TRUCK ENGINE Crankshaft Front Seal Wear Sleeve
1673 DIESEL TRUCK ENGINE Timing Gear Cover
1673 DIESEL TRUCK ENGINE Accessory Drive Shaft
1673 DIESEL TRUCK ENGINE Camshaft
1673 DIESEL TRUCK ENGINE Timing Gears And Plate
1673 DIESEL TRUCK ENGINE Crankshaft Drive Gear
1673 DIESEL TRUCK ENGINE Water Temperature Regulator