Oil Cooler
Usage:
Remove Oil Cooler
1. Drain the engine cooling system.
2. Remove the oil cooler oil supply line (3) and oil return line (4).
3. Remove the oil filter housing and base (1).
4. Disconnect the oil level gauge mounting clamp (2).
5. Remove the three oil cooler-to-cylinder block retaining bolts (6).
6. Remove the four oil cooler-to-bonnet retaining bolts (5).
7. Remove the oil cooler-weight 40 lbs. (18,1 kg).
Install Oil Cooler
1. Position the oil cooler on the engine and install the mounting bolts.
2. Connect the oil level gauge mounting clamp.
3. Install the oil filter housing and base.
4. Install the oil cooler oil supply line and oil return line.
5. Fill the engine cooling system.
Caterpillar Information System:
1673 DIESEL TRUCK ENGINE Crankshaft Main Bearings
1673 DIESEL TRUCK ENGINE Connecting Rod Bearings
1673 DIESEL TRUCK ENGINE Oil Pump
1673 DIESEL TRUCK ENGINE Oil Pan
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1673 DIESEL TRUCK ENGINE Governor
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1673 DIESEL TRUCK ENGINE Fuel Ratio Control
1673 DIESEL TRUCK ENGINE Fuel Transfer Pump
1673 DIESEL TRUCK ENGINE Fuel Filter Housing
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Timing Fuel Flow Method
1673 DIESEL TRUCK ENGINE Air Compressor
1673 DIESEL TRUCK ENGINE Water Pump
1673 DIESEL TRUCK ENGINE Hydraulic Pump Drive
1673 DIESEL TRUCK ENGINE Starter
1673 DIESEL TRUCK ENGINE Alternator And Mount
1673 DIESEL TRUCK ENGINE Fan Drive
1673 DIESEL TRUCK ENGINE Engine Front Support
1673 DIESEL TRUCK ENGINE Crankshaft Pulley And Hub
1673 DIESEL TRUCK ENGINE Crankshaft Front Seal
1673 DIESEL TRUCK ENGINE Crankshaft Front Seal Wear Sleeve
1673 DIESEL TRUCK ENGINE Timing Gear Cover
1673 DIESEL TRUCK ENGINE Accessory Drive Shaft