Fuel Injection Pump Housing And Governor
Usage:
Remove Fuel Injection Pump Housing And Governor As A Unit
1. Disconnect the fuel injection lines (2) and install protective caps.
2. Disconnect the fuel ratio control sensing line (3).
3. Disconnect the turbocharger oil supply line (6) and clamp.
4. Remove six fuel injection pump housing-to-accessory drive housing mounting bolts (4).
5. Disconnect the governor control linkage (1) from the governor control lever.
6. Remove two bracket-to-injection pump housing mounting bolts (5).
7. Remove governor and fuel injection pump housing as a unit-weight 60 lbs. (27,2 kg).
Caterpillar Information System:
1673 DIESEL TRUCK ENGINE Fuel Ratio Control
1673 DIESEL TRUCK ENGINE Fuel Transfer Pump
1673 DIESEL TRUCK ENGINE Fuel Filter Housing
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Timing Fuel Flow Method
1673 DIESEL TRUCK ENGINE General Instructions
1673 DIESEL TRUCK ENGINE Testing And Adjusting
1673 DIESEL TRUCK ENGINE Systems Operation
1673 DIESEL TRUCK ENGINE Air Compressor (9L5366)
1673 DIESEL TRUCK ENGINE Solenoid Switches
1673 DIESEL TRUCK ENGINE Starting Motors
1673 DIESEL TRUCK ENGINE Alternator
1673 DIESEL TRUCK ENGINE Turbocharger Airesearch T1224
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1673 DIESEL TRUCK ENGINE Governor
1673 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1673 DIESEL TRUCK ENGINE Oil Pan
1673 DIESEL TRUCK ENGINE Oil Pump
1673 DIESEL TRUCK ENGINE Connecting Rod Bearings
1673 DIESEL TRUCK ENGINE Crankshaft Main Bearings
1673 DIESEL TRUCK ENGINE Oil Cooler
1673 DIESEL TRUCK ENGINE Air Compressor
1673 DIESEL TRUCK ENGINE Water Pump
1673 DIESEL TRUCK ENGINE Hydraulic Pump Drive
1673 DIESEL TRUCK ENGINE Starter