1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Caterpillar


Crankshaft Wear Sleeve

Usage:

Remove Crankshaft Wear Sleeve

1. Install the 8S7164 Wear Sleeve Puller Group and remove the wear sleeve.


REMOVING WEAR SLEEVE

Install Crankshaft Wear Sleeve

1. Place the wear sleeve between the end of the crankshaft and the pilot (2) from the 8S5135 Rear Seal Tool Group. Be sure the lead chamfer for the seal on the wear sleeve is toward the flywheel end of the crankshaft.

2. Tighten the pilot retaining bolts (1) evenly (approximately one half turn at a time). When installed, the wear sleeve will be flush with the end of the crankshaft and the pilot will be solid against the end of crankshaft.


INSTALLING WEAR SLEEVE
1. 1P5515 Bolts. 2. 8S5134 Pilot.

Caterpillar Information System:

1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Rear Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Flywheel Housing
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Flywheel
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft (Engines With Taper Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engine with Engine Camshaft Mounted Timing Advance and Bolt On Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Timing Gear Cover
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Front Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Gear
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Main Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Engine Front Support
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pan
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump Relief Valve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Cooler
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE GENERAL INFORMATION
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Basic Block
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Cylinder Head And Valve Components
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Connecting Rod
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.