Crankshaft Gear
Usage:
Remove Crankshaft Gear
1. Remove the gear using an 8B7548 Push Puller, 8B7551 Bearing Pulling Attachment, 8B7561 Step Plate, and the 8H684 Ratchet Box Wrench.
REMOVING CRANKSHAFT GEAR
2. The 1P820 Hydraulic Puller Group can also be used to remove gear from crankshaft. Tools required are: 1P820 Hydraulic Puller Group, 8B7551 Bearing Pulling Attachment, 8B7549 Puller Legs (two), 8B7561 Step Plate, 3H465 Plates (four), 1B4207 Nuts (two), and the 9S5800 Pump Group.
USING HYDRAULIC PULLER
Install Crankshaft Gear
1. Install the key in keyway of crankshaft. Remove all burrs from key and keyway inside of crankshaft gear.
2. Heat gear to 300° F (148° C) maximum.
3. Install gear on crankshaft with timing mark on gear facing front of crankshaft.
Caterpillar Information System:
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Wear Sleeve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Rear Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Flywheel Housing
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Flywheel
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft (Engines With Taper Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engine with Engine Camshaft Mounted Timing Advance and Bolt On Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Timing Gear Cover
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Main Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Engine Front Support
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pan
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump Relief Valve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Cooler
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE GENERAL INFORMATION
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Basic Block
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Cylinder Head And Valve Components
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Connecting Rod
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankcase