1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Caterpillar


Flywheel Housing

Usage:

Remove Flywheel Housing

1. Remove the flywheel housing retaining bolts (1).

2. Remove the flywheel housing (2).


FLYWHEEL HOUSING
1. Bolts (ten). 2. Flywheel housing.

Install Flywheel Housing

1. Clean gasket surface and install a new gasket.

2. Install the flywheel housing. Install retaining bolts. The two lower bolts use sheet metal locks. The others use lock-washers. Tighten bolts and bend the two locks.

NOTE: Trim the flywheel housing gasket flush with the pan face of cylinder block. Gaskets not cut square and flush with oil pan face will leak.

Caterpillar Information System:

1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Flywheel
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft (Engines With Taper Drive For Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engine with Engine Camshaft Mounted Timing Advance and Bolt On Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Timing Gear Cover
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Front Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Pulley
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Pistons
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Cylinder Heads
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Rear Oil Seal
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Wear Sleeve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Crankshaft Gear
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Main Bearings
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Engine Front Support
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pan
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Pump Relief Valve
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Oil Cooler
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE GENERAL INFORMATION
1140, 1145, 1150 & 1160 DIESEL TRUCK ENGINE Basic Block
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.