PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR COOLING FAN GEAR MOTOR GP ON CERTAIN CB14B UTILITY COMPACTORS
Usage:
TEBE4833-00
Show/hide table
| 20Sep2016 |
U-487
A-357
D-421
O-421
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR COOLING FAN GEAR MOTOR GP ON CERTAIN CB14B UTILITY COMPACTORS |
|
| 1386 5061 | PS53302 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53302" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2019 |
PROBLEM
Show/hide table
| The 3944551/">394-4551 Gear Motor Gp for the Radiator Cooling Fan, can fail on certain CB14B Utility Compactors. If the Gear Motor fails, engine overheating and/or hard steering can result. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| CB14B | 47300100-01480 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3944551 | MOTOR GP-GR(BSC) |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 5% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Refer to Testing & Adjusting media UENR2015, "Fan Motor Speed (Radiator Cooling) ? Test" in Machine Systems and perform this test, if/as necessary and see Special Instruction M0075386 Procedure to Troubleshoot Engine Overheating and Hard Steering For CB14B Utility Compactors. If the Vibration Frequency Test meets specification, and the Fan Motor Speed Test fails, replace the 3944551/">394-4551 Gear Motor Gp with like part. See Special Instruction M0075386 for the procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-18 mo |
||||||
19-24 mo |
||||||
25-36 mo |
||||||
Show/hide table
| NOTE: This is a 4.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND UPDATING ALL-WHEEL DRIVE HOSES ON CERTAIN 160M AND 14L MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND UPDATING ALL-WHEEL DRIVE HOSES ON CERTAIN 160M AND 14L MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FRAME PLATE ON CERTAIN 655F ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FRAME PLATE ON CERTAIN 655F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4D-4431 ANGLE CYLINDER BEARING ON CERTAIN 527 TRACK SKIDDERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4D-4431 ANGLE CYLINDER BEARING ON CERTAIN 527 TRACK SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING HP TURBO WASTEGATE ACTUATOR ON CERTAIN 324E, 329E EXCAVATORS AND 3570C, 2670C, 563C, 573C WHEEL FELLER BUNCHERS PRODUCT SUPPORT PROGRAM FOR REPLACING HP TURBO WASTEGATE ACTUATOR ON CERTAIN 324E, 329E EXCAVATORS AND 3570C, 2670C, 563C, 573C WHEEL FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ESCAPE HATCHES ON CERTAIN 2390, 2491, 511, 521, 521B, 522, 522B, 532, 541, 541 SERIES 2, 552, AND 552 SERIES 2 TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ESCAPE HATCHES ON CERTAIN 2390, 2491, 511, 521, 521B, 522, 522B, 532, 541, 541 SERIES 2, 552, AND 552 SERIES 2 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR SYSTEM FRAME ON CERTAIN 797F HIGH ALTITUDE ARRANGEMENT OFF HIGHWAY TRUCK ENGINES AT PLANNED COMPONENT REBUILD (PCR) PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR SYSTEM FRAME ON CERTAIN 797F HIGH ALTITUDE ARRANGEMENT OFF HIGHWAY TRUCK ENGINES AT PLANNED COMPONENT REBUILD (PCR)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL TANK ON CERTAIN 793D OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL TANK ON CERTAIN 793D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT SUSPENSION CYLINDERS ON CERTAIN 775G OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT SUSPENSION CYLINDERS ON CERTAIN 775G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING EJECTOR BUCKET PILOT LINES GROUP ON CERTAIN R1600H LOAD HAUL DUMP MACHINES PRODUCT SUPPORT PROGRAM FOR REWORKING EJECTOR BUCKET PILOT LINES GROUP ON CERTAIN R1600H LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME HARDWARE ON CERTAIN 777F AND 777G OFF-HIGHWAY TRUCK PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME HARDWARE ON CERTAIN 777F AND 777G OFF-HIGHWAY TRUCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ACCESSORY POWER INVERTER FAN WIRING AND UPDATING THE SOFTWARE ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ACCESSORY POWER INVERTER FAN WIRING AND UPDATING THE SOFTWARE ON CERTAIN AP500F, AP555F, AP600F, AP655F, AP1000F, AND AP1055F ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR RIGHT HAND CONVEYOR HOSES ON CERTAIN AP555F AND AP500F ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR RIGHT HAND CONVEYOR HOSES ON CERTAIN AP555F AND AP500F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE A/C ACCUMULATOR ON CERTAIN 272D2/272D2 XHP SKID STEER LOADERS, 297D2/297D2 XHP MULTI TERRAIN LOADERS, AND 299D2/299D2 XHP COMPACT TRACK LOADERS, EQUIPPED WITH AN HVAC SYSTEM PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING THE A/C ACCUMULATOR ON CERTAIN 272D2/272D2 XHP SKID STEER LOADERS, 297D2/297D2 XHP MULTI TERRAIN LOADERS, AND 299D2/299D2 XHP COMPACT TRACK LOADERS, EQUIPPED WITH AN HVAC SYSTEM
PRODUCT SUPPORT PROGRAM FOR INSTALLING A DOUBLE FORK SWING FRAME AND CAST SLIDER FRAME ON CERTAIN 424 BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A DOUBLE FORK SWING FRAME AND CAST SLIDER FRAME ON CERTAIN 424 BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING TWO 244-8593 GEARS IN THE FRONT GEAR ASSEMBLY ON CERTAIN C175 REMAN ENGINES IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING TWO 244-8593 GEARS IN THE FRONT GEAR ASSEMBLY ON CERTAIN C175 REMAN ENGINES IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE COUPLER ASSEMBLY ON CERTAIN 246D/262D/272D2/272D2XHP SKID STEER LOADERS, 277D/287D/297D2/297D2XHP MULTI TERRAIN LOADERS, AND 279D/289D/299D2/299D2XHP COMPACT TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE COUPLER ASSEMBLY ON CERTAIN 246D/262D/272D2/272D2XHP SKID STEER LOADERS, 277D/287D/297D2/297D2XHP MULTI TERRAIN LOADERS, AND 279D/289D/299D2/299D2XHP COMPACT TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CERTAIN 9V-7710 UNIVERSAL JOINTS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CERTAIN 9V-7710 UNIVERSAL JOINTS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR ADDING POST WELD TREATMENT TO THE INNER RIGHT HAND WINDOW PLATE ATTACHMENTS IN THE MID FRAME SECTION ON CERTAIN 793F, 793F AC, 793F CMD, 793F OEM, AND 793F XQ OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR ADDING POST WELD TREATMENT TO THE INNER RIGHT HAND WINDOW PLATE ATTACHMENTS IN THE MID FRAME SECTION ON CERTAIN 793F, 793F AC, 793F CMD, 793F OEM, AND 793F XQ OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 285-6647 WIRING HARNESSES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 285-6647 WIRING HARNESSES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 277-2515 PUMP GROUP ON CERTAIN PM200 AND PM102 COLD PLANERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE 277-2515 PUMP GROUP ON CERTAIN PM200 AND PM102 COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN C175 CAMSHAFTS AND LIFTER LEVERS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN C175 CAMSHAFTS AND LIFTER LEVERS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR ADDING POST WELD TREATMENT AND UPDATING THE AUXILIARY OIL COOLER MOUNTING TO THE INNER LEFT HAND WINDOW PLATE IN THE MID FRAME SECTION ON CERTAIN 793F, 793F CMD, 793F OEM, AND 793F XQ OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR ADDING POST WELD TREATMENT AND UPDATING THE AUXILIARY OIL COOLER MOUNTING TO THE INNER LEFT HAND WINDOW PLATE IN THE MID FRAME SECTION ON CERTAIN 793F, 793F CMD, 793F OEM, AND 793F XQ OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPAIRING MID-FRAME CRACKS AT THE COOLER MOUNTING BLOCKS ON CERTAIN 793F, 793F AC, 793F CMD, AND 793F XQ OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPAIRING MID-FRAME CRACKS AT THE COOLER MOUNTING BLOCKS ON CERTAIN 793F, 793F AC, 793F CMD, AND 793F XQ OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE RIGHT SIDE LADDER AND REPLACING THE HANDRAIL CLAMPS ON CERTAIN PM620 AND PM622 COLD PLANERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE RIGHT SIDE LADDER AND REPLACING THE HANDRAIL CLAMPS ON CERTAIN PM620 AND PM622 COLD PLANERS