Shorter Bolts Used For Bolt-On Cutting Edges {6801}
Usage:
All Backhoe Loaders
Description of Change: Shorter bolts are now used to fasten the bolt-on cutting edges to the loader buckets. The former bolts were too long.
Adaptable To: The new 3F5108 Plow Bolts are direct replacements for the former 4F3657 Plow Bolts in the 9R5320 and 9R5321 Cutting Edge Groups.
Caterpillar Information System:
1988/12/26 Improved Boom Cylinder Lines {5057,5456}
1988/12/26 New Gas Cylinder Used In Operator's Console {7451}
1988/12/26 Check Bore Length Of Gear And Sleeve Before Assembling In Transmission {3061}
1988/12/26 Enlarge Lower Hook Openings On Three-Point Hitch Quick Coupler Group {7120}
1988/12/26 Check Load Height Before Transporting Machines {7500}
1988/12/26 New Muffler And Pipe Used; Low Idle Increased {1061,1062,1264}
1988/12/19 Twelve Bolts Used In Drum Support Bearing Retainer {8227}
1988/12/19 Operation Of Differential Lock {3264}
1988/12/19 Do Not Use Heli-Coils® To Repair Rocker Arm Assemblies On 5.4" Bore Engines {1123}
1988/12/19 New Piston Body Assemblies Used {1214}
1988/12/19 Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19 New Camshafts Used; Camshaft Installation Kits Available {1209,1210}
1988/12/26 Be Sure Breathers Are Connected When Winches Are Installed {5163}
1988/12/26 New Governor Control Cable Used {1265}
1988/12/26 New Coolant Flow Switch Available {7422,7425}
1988/12/26 Cylinder Block To Aftercooler Connectors {1063,1201}
1988/12/26 Procedure To Replace Studs In Bottom Wear Plate On VIP Screeds {8225}
1979/01/08 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed{7462}
1979/01/08 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08 New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/15 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15 Removal And Installation Of Taper Type Bearings{0622,1214,1219}
1979/01/15 6V83 Emery Polishing Paper{0675}
1979/01/22 Current Chart For Dynamometer Adapters{0651,1000}