New Governor Control Cable Used {1265}
Usage:
D25C, D30C, D35C, D350C, D35HP and D400 Trucks
Description of Change: A new governor control cable is used on the above trucks. The new part is more resistant to high temperature than the former part.
Adaptable To: The new 7X1606 Cable is a direct replacement for the former 3U5421 Cable. The new cable is in effect with machine numbers: 9YC759, 7ZC234, 2GD115, 8XC324, 3FD77, and 1MD177.
Caterpillar Information System:
1988/12/26 Be Sure Breathers Are Connected When Winches Are Installed {5163}
1988/12/26 Shorter Bolts Used For Bolt-On Cutting Edges {6801}
1988/12/26 Improved Boom Cylinder Lines {5057,5456}
1988/12/26 New Gas Cylinder Used In Operator's Console {7451}
1988/12/26 Check Bore Length Of Gear And Sleeve Before Assembling In Transmission {3061}
1988/12/26 Enlarge Lower Hook Openings On Three-Point Hitch Quick Coupler Group {7120}
1988/12/26 Check Load Height Before Transporting Machines {7500}
1988/12/26 New Muffler And Pipe Used; Low Idle Increased {1061,1062,1264}
1988/12/19 Twelve Bolts Used In Drum Support Bearing Retainer {8227}
1988/12/19 Operation Of Differential Lock {3264}
1988/12/19 Do Not Use Heli-Coils® To Repair Rocker Arm Assemblies On 5.4" Bore Engines {1123}
1988/12/19 New Piston Body Assemblies Used {1214}
1988/12/26 New Coolant Flow Switch Available {7422,7425}
1988/12/26 Cylinder Block To Aftercooler Connectors {1063,1201}
1988/12/26 Procedure To Replace Studs In Bottom Wear Plate On VIP Screeds {8225}
1979/01/08 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed{7462}
1979/01/08 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08 New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/15 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15 Removal And Installation Of Taper Type Bearings{0622,1214,1219}
1979/01/15 6V83 Emery Polishing Paper{0675}
1979/01/22 Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22 Ether Starting Aid Groups Are Now Available{1456}
1979/01/29 Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}