Counterweight - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 418-4568 | 表组件 | 1 |
- 松开配重底部的安装螺栓 (1)。
Show/hide table
图 2 g06312509 Show/hide table图 3 g06312514 - 打开右侧门组件 (2)。 打开左侧门组件 (3)。
Show/hide table
图 4 g06312518 注: 安装过程中,需要两个人帮助固定配重组件 (4)。
- 将安装螺栓 (1) 从配重组件 (4) 上拆下。 将工具 (A) 定位在配重组件下方,向后滑到工具 (A) 上。 配重组件 (A) 的重量约为
50 kg (110 lb) 。
Show/hide table
图 1 | g06312504 |
- 按与拆卸相反的顺序安装配重组件 (4)。
Caterpillar Information System:
323D3 Excavators Engine Oil Sample - Obtain
323D3 Hydraulic Excavators Engine Supplements Engine - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Electric Starting Motor - Remove and Install
320D3 and 323D3 Excavators Systems Pilot Valve (Joystick)
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Assemble
320D3 and 323D3 Excavators Systems Pilot Hydraulic System
C9.3 Marine Engine Radiator Core - Remove and Install - Jacket Water Radiator Core
320D3 Excavators Condenser (Refrigerant) - Clean
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Disassemble
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
320D3 Hydraulic Excavator Machine Systems Operator Console - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat Suspension - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat Support - Remove and Install
323D3 Excavators Engine Oil and Filter - Change
323D3 Excavators Fuel Filter Change Indicator - Inspect
323D3 Excavators Fuel System Secondary Filter - Replace
323D3 Excavators Fuel System Primary Filter (Water Separator) Element - Replace
323D3 Excavators Fuel System Water Separator - Drain
Well Stimulation Pumps Pump (Power End) Breather - Inspect/Clean/Replace
320D3 Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
Well Stimulation Pumps Pump (Fluid End) Mounting Bolts - Check