Solenoid Valve (DEF Heater Coolant) - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain coolant to a suitable level. Refer to Operation and Maintenance Manual, Cooling System Coolant - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g06261556 - Remove bolts (1) and cover (2).
Show/hide table
Illustration 2 g06261564 Top View - Disconnect connectors (3). Remove clamps (4) and hoses (5).
Show/hide table
Illustration 3 g06261599 - Remove bolts (6). Remove solenoid valve (7).
Show/hide table
Illustration 4 g06261602 - Remove bolts (9). Remove solenoid valves (7) from bracket (8).
- Repeat Steps 2 through 5 for the remaining solenoid valves.
- Install solenoid valve (5) in the reverse order of removal.
- Tighten eight bolts (9) to a torque of
10 ± 1 N·m (89 ± 9lb in) .
- Tighten eight bolts (9) to a torque of
Caterpillar Information System:
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
PM820, PM822, and PM825 Cold Planer Air Pressure Regulator
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement System Pressure - Release
320D3 Excavators Bucket Tips - Inspect/Replace
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
320D3 Excavators Bucket Tips - Inspect/Replace - Drive-through System
320D3 and 323D3 Excavators Systems Travel Hydraulic System
320D3 Hydraulic Excavator Machine Systems Stick Cylinder - Assemble
320D3 and 323D3 Excavators Systems Oil Makeup (Swing System)
320D3 and 323D3 Excavators Systems Relief Valve (Swing)
New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490} New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490}
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Disassemble
320D3 Excavators Condenser (Refrigerant) - Clean
C9.3 Marine Engine Radiator Core - Remove and Install - Jacket Water Radiator Core
320D3 and 323D3 Excavators Systems Pilot Hydraulic System
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Assemble
320D3 and 323D3 Excavators Systems Pilot Valve (Joystick)
323D3 Hydraulic Excavators Engine Supplements Electric Starting Motor - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Engine - Remove and Install
323D3 Excavators Engine Oil Sample - Obtain
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install