| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Open the access door on the right side of the machine.
Show/hide table
Illustration 1 g06312285 - Open drain valve (1) on the bottom of the fuel/water separator element. Drain the water into a suitable container.
- Close the drain valve when all of the water has been drained.
Note: When water is not drained from the primary filter sufficiently, water will collect in the secondary fuel filter. Trapped water will eventually overflow. Draining water from the secondary fuel filter will prevent water damaging the fuel system.
Show/hide table
Illustration 2 g06312288 - Locate drain valve (2) on the bottom of the secondary fuel filter element.
- Open the drain valve and drain the water into a suitable container.
- Close the drain valve when all of the water has been drained.
- Close the access door.
