320D3 Excavators Caterpillar


Condenser (Refrigerant) - Clean

Usage:

320D3 ESX


NOTICE

If excessively dirty, clean condenser with a brush. To prevent damage or bending of the fins, do not use a stiff brush.

Repair the fins if found defective.




Illustration 1g00102191

  1. Open the access door on the left side of the machine.


    Illustration 2g06311858

  2. Inspect the condenser for debris. Clean the condenser, if necessary.

  3. Use clean water to wash off all dust and dirt from the condenser.

  4. Close the access door.

Caterpillar Information System:

320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Disassemble
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
PM820, PM822, and PM825 Cold Planer Air Pressure Regulator
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement System Pressure - Release
320D3 Excavators Bucket Tips - Inspect/Replace
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
320D3 Excavators Bucket Tips - Inspect/Replace - Drive-through System
320D3 and 323D3 Excavators Systems Travel Hydraulic System
320D3 Hydraulic Excavator Machine Systems Stick Cylinder - Assemble
C9.3 Marine Engine Radiator Core - Remove and Install - Jacket Water Radiator Core
320D3 and 323D3 Excavators Systems Pilot Hydraulic System
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Assemble
320D3 and 323D3 Excavators Systems Pilot Valve (Joystick)
323D3 Hydraulic Excavators Engine Supplements Electric Starting Motor - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Engine - Remove and Install
323D3 Excavators Engine Oil Sample - Obtain
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
320D3 Hydraulic Excavator Machine Systems Operator Console - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat Suspension - Remove and Install
320D3 Hydraulic Excavator Machine Systems Seat Support - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.