Vibration Damper and Pulley - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 8T-0514 | Guide Stud | 1 |
Start By:
- Remove engine.
- Remove the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Show/hide table
Illustration 1 g01870577 - Remove one of bolts (1). Install Tooling (A). Remove remaining bolts (1) and pulley assembly (2).
Show/hide table
Illustration 2 g01870580 - Remove vibration damper (3).
- Install vibration damper (3) and pulley assembly (2) in reverse order of removal.
Caterpillar Information System:
C13 Generator Set Engine Flywheel - Remove and Install
C13 Generator Set Engine Air Control Valve - Remove and Install
C7.1 Engines Data Link - Test
C2.2 Engines for Caterpillar Built Machines Engine Oil Filter
C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
C13 Generator Set Engine Voltage Regulator - Remove and Install
C4.4 and C6.6 Engines Cooling Fan Speed - Test
C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
C13 Generator Set Engine Battery Charger - Remove and Install
2015/01/23 New Coupling Bolts and Couplings Are Used On Certain 3512C Engines {3252}
2015/01/16 Cat® Reman Announces the Availability of Remanufactured Engines for Certain Electric Power Generation Applications {1000}
C13 Generator Set Engine Alternator - Remove and Install
C7.1 Engines Data Link Configuration Status - Test
C7.1 Engines DEF Control Module Power - Test
794 AC Off-Highway Truck Engine Supplement Hood - Remove and Install
C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
C7.1 Engines DEF Line Heater - Test
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust)
C13 Generator Set Engine Engine Oil Pan - Remove and Install
3512E Engines Water Temperature Regulators - Remove and Install - Jacket Water
3512E Engines Water Temperature Regulators - Remove and Install - SCAC