C2.2 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Relief Valve

Usage:

239D BL9


Illustration 1g03785177
Typical example

Note: When the engine oil relief valve is installed, ensure that all components are clean. Lightly lubricate all components with clean engine oil.

(1) O-ring

A new O-ring should be used when the engine oil relief valve is installed.

(2) Tighten the engine oil relief valve to the following torque. ... 54 N·m (40 lb ft)

The engine oil pressure at the engine oil relief valve is the following value. ... 402 kPa (58 psi)

Note: Always remove the engine oil relief valve before removing or installing the crankshaft. Damage to the engine oil relief valve or damage to the crankshaft may occur.

Caterpillar Information System:

C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
C13 Generator Set Engine Battery Charger - Remove and Install
2015/01/23 New Coupling Bolts and Couplings Are Used On Certain 3512C Engines {3252}
F Series Excavator Monitoring System Prestart Monitoring Function - If Equipped
C2.2 Engines for Caterpillar Built Machines Camshaft
C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
C4.4 Engines Cooling Fan Control - Test - Hydraulic Driven Fan
C13 Generator Set Engine Electric Starting Motor - Remove and Install
793F and 793F CMD Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C4.4 and C6.6 Engines Cooling Fan Speed - Test
C13 Generator Set Engine Voltage Regulator - Remove and Install
C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
C2.2 Engines for Caterpillar Built Machines Engine Oil Filter
C7.1 Engines Data Link - Test
C13 Generator Set Engine Air Control Valve - Remove and Install
C13 Generator Set Engine Flywheel - Remove and Install
C13 Generator Set Engine Vibration Damper and Pulley - Remove and Install
2015/01/16 Cat® Reman Announces the Availability of Remanufactured Engines for Certain Electric Power Generation Applications {1000}
C13 Generator Set Engine Alternator - Remove and Install
C7.1 Engines Data Link Configuration Status - Test
C7.1 Engines DEF Control Module Power - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.