Flywheel - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | FT-2712 | Guide Stud | 2 |
Start By:
- Remove engine
- Remove two of bolts (1) and install Tooling (A).
- Use two people to remove flywheel (2). The weight of flywheel (2) is approximately
41 kg (90 lb) . Remove remaining bolts (1) and flywheel (2). - Use a hammer and a punch in order to remove the ring gear.
Show/hide table
Illustration 1 | g01871015 |
- Install flywheel (2) in reverse order of removal.
- Raise the temperature of the ring gear. Use a soft hammer in order to seat the ring gear on the flywheel.
- Tighten bolts (1) to a torque of
300 ± 40 N·m (221 ± 30 lb ft) .
Show/hide table
Always wear protective gloves when handling parts that have been heated. |
Caterpillar Information System:
C13 Generator Set Engine Air Control Valve - Remove and Install
C7.1 Engines Data Link - Test
C2.2 Engines for Caterpillar Built Machines Engine Oil Filter
C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
C13 Generator Set Engine Voltage Regulator - Remove and Install
C4.4 and C6.6 Engines Cooling Fan Speed - Test
C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
C13 Generator Set Engine Battery Charger - Remove and Install
2015/01/23 New Coupling Bolts and Couplings Are Used On Certain 3512C Engines {3252}
F Series Excavator Monitoring System Prestart Monitoring Function - If Equipped
C13 Generator Set Engine Vibration Damper and Pulley - Remove and Install
2015/01/16 Cat® Reman Announces the Availability of Remanufactured Engines for Certain Electric Power Generation Applications {1000}
C13 Generator Set Engine Alternator - Remove and Install
C7.1 Engines Data Link Configuration Status - Test
C7.1 Engines DEF Control Module Power - Test
794 AC Off-Highway Truck Engine Supplement Hood - Remove and Install
C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
C7.1 Engines DEF Line Heater - Test
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust)
C13 Generator Set Engine Engine Oil Pan - Remove and Install
3512E Engines Water Temperature Regulators - Remove and Install - Jacket Water