Fan Drive
Show/hide table
Illustration 1 | g03708691 |
Show/hide table
Specification for 357-0876 Fan Drive Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 1Y-3844 Taperlock Stud | Torque to |
2 | 6 | 2M-2488 Taperlock Stud | Torque to |
3 | 1 | 9X-8874 Bolt | Before assembly apply blue Loctite 242 to the threads.
Torque to |
Caterpillar Information System:
3306B-XQ200 Rental Generator Set Engine Refill Capacities
C13 Industrial Engine Diagnostic Capabilities
C4.4 Engines for Caterpillar Built Machines Aftertreatment SCR System Dosing - Test
2014/10/03 New Wiring Harnesses Are Used on Certain C175 Marine and Petroleum Engines {1408}
C13 Industrial Engine Diesel Particulate Filter Regeneration
2014/08/07 Ash Service Reset Clarification for Certain Truck Engines {108F}
C13 Industrial Engine General Information
462-1062 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 462-1062 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000} Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
460-9818 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9818 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
3516C and C175-16 Engines Selective Catalytic Reduction NOx Conversion Is Low
460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
462-1133 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 462-1133 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
3516C Marine Engines Fuel Injector
3516C Marine Engines Turbocharger Oil Lines
460-8972 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8972 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM820, PM822, and PM825 Cold Planer Track Shoe Bolts - Tighten
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Speed Control - Test
3516C Marine Engines Exhaust Elbow
3512C Engine Air Inlet Manifold - Remove and Install
C175-16 Locomotive Engine Speed/Timing - Test
3516B Generator Set Engines with Dynamic Gas Blending Inlet Air Is Restricted
PM820, PM822, and PM825 Cold Planer Tracks - Inspect
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Transmission Oil Temperature Is High