Exhaust Elbow
Show/hide table
Illustration 1 | g03709080 |
Show/hide table
Specification for 378-8893 Exhaust Elbow Gp | |||
Item | Qty | Part | Specification Description |
1 | 12 | 1C-2251 Bolt | Before assembly, lubricate the washer surfaces and threads with Loctite C5A Copper Anti-Seize. |
2 | 2 | 263-1174 Band Clamp | Before assembly, lubricate the threads, bearing surfaces and inside diameter of the clamps with Loctite C5A Copper Anti-Seize. |
Torque to |
|||
3 | 4 | 7L-6443 High Temperature Bolt | Before assembly, lubricate the washer surfaces and threads with Loctite C5A Copper Anti-Seize. |
4 | 12 | 9L-2295 High Temperature Bolt | Before assembly, lubricate the washer surfaces and threads with Loctite C5A Copper Anti-Seize. |
Caterpillar Information System:
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Speed Control - Test
PM820, PM822, and PM825 Cold Planer Track Shoe Bolts - Tighten
460-8972 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-8972 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
3516C Marine Engines Turbocharger Oil Lines
3516C Marine Engines Fuel Injector
462-1133 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 462-1133 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C27 and C32 Generator Set Engines Fan Drive
3306B-XQ200 Rental Generator Set Engine Refill Capacities
C13 Industrial Engine Diagnostic Capabilities
C4.4 Engines for Caterpillar Built Machines Aftertreatment SCR System Dosing - Test
2014/10/03 New Wiring Harnesses Are Used on Certain C175 Marine and Petroleum Engines {1408}
C13 Industrial Engine Diesel Particulate Filter Regeneration
3512C Engine Air Inlet Manifold - Remove and Install
C175-16 Locomotive Engine Speed/Timing - Test
3516B Generator Set Engines with Dynamic Gas Blending Inlet Air Is Restricted
PM820, PM822, and PM825 Cold Planer Tracks - Inspect
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Transmission Oil Temperature Is High
PM820, PM822, and PM825 Cold Planer Upper Conveyor Deflectors (Second Stage) - Inspect/Replace
PM820, PM822, and PM825 Cold Planer Upper Conveyor Support Cables - Check
PM820, PM822, and PM825 Cold Planer Water Spray Nozzles - Clean
G3304B and G3306B Engines Air/Fuel Ratio Problem
PM820, PM822, and PM825 Cold Planer Water Spray System - Inspect
DE Series Generator Set With Cat C4.4 Engine Model View Illustrations
2014/12/12 A New Ignition Transformer Group Is Available For Certain G3500C, G3500E, and G3600 Engines {1409, 1550}