C280-08 Marine Engine Caterpillar


Plate Locations and Film Locations

Usage:

C280-08 J4R

Identifikasi Engine

Engine Cat diidentifikasi dengan nomor seri, nomor spesifikasi kinerja, dan nomor pengaturan. Pada beberapa kasus, nomor modifikasi digunakan. Nomor ini tertera di Pelat Nomor Seri dan Pelat Informasi yang terpasang pada engine.

Dealer Cat memerlukan nomor ini untuk menentukan komponen yang tercakup bersama engine. Informasi ini memungkinkan identifikasi nomor suku cadang pengganti yang akurat.

Pelat Informasi Engine




Ilustrasi 1g02935657

(1) Pelat informasi engine




Ilustrasi 2g02935876

Pelat informasi engine terletak di antara dua penutup karter terakhir di sisi kanan engine.

Pelat Nomor Seri




Ilustrasi 3g02935658

(2) Pelat nomor seri engine




Ilustrasi 4g00123229

Pelat nomor seri terletak di antara dua penutup karter terakhir di sisi kanan engine.




Ilustrasi 5g03527776

Pelat nomor seri terletak di bagian atas rumah reaktor.

Caterpillar Information System:

C280-16 Engine Alternator - Remove and Install
2014/03/31 A New Rear Engine Crankshaft Seal Is Now Used on Certain Excavators Equipped With C13 Engines {1161}
C175 Oil Pressure Regulator Inspection and Rework{1304, 5117} C175 Oil Pressure Regulator Inspection and Rework{1304, 5117}
C15 and C18 On-Highway Engines Engine Control Module - Remove and Install
C15 and C18 On-Highway Engines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
2013/12/20 Improved Product Link Satellite System Special Instruction guide {7606}
TA2 Technical Inspection for 3512B Dynamic Gas Blending Genset Engines{1000, 1050, 1250, 1300, 1350, 1400} TA2 Technical Inspection for 3512B Dynamic Gas Blending Genset Engines{1000, 1050, 1250, 1300, 1350, 1400}
C15 and C18 On-Highway Engines Engine Oil Pan - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Water in Fuel - Test
C15 and C18 On-Highway Engines Camshaft - Remove and Install
C15 and C18 On-Highway Engines Camshaft - Remove and Install
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C15 and C18 On-Highway Engines Vibration Damper and Pulley - Remove and Install
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C280-16 Engine Crankcase Explosion Relief Valve - Remove and Install
C15 and C18 On-Highway Engines Front Cover - Remove and Install
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412} A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
C15 and C18 On-Highway Engines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure
C11 and C13 On-Highway Engines Compression Brake Lash - Adjust
C15 and C18 On-Highway Engines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Outlet Pressure
C15 and C18 On-Highway Engines Boost Pressure Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.