Refill Capacities
The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications in order to find the capacity of the auxiliary oil filter.
Show/hide table
Engine
Refill Capacities |
||
---|---|---|
Compartment or System | Minimum | Maximum |
Crankcase Oil Sump(1) | |
|
Show/hide table
(1) | These values are the approximate capacities for the crankcase oil sump (aluminum) which includes the standard factory installed oil filters. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
Show/hide table
Engine
Refill Capacities |
|
---|---|
Compartment or System | Capacity |
Engine & Radiator coolant capacity | |
Engine coolant capacity | |
Caterpillar Information System:
C280-16 Engine Engine Power Ratings
C175-16 Locomotive Engine Pistons, Liners, and Connecting Rods - Remove and Install
C7.1 Engines for Caterpillar Built Machines Turbocharger
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Pressure Sensor
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Electronic Control Module (Engine) - Remove and Install
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C32 Marine Engines Flywheel Housing
C7.1 Industrial Engine Refill Capacities