Turbocharger
Show/hide table
Illustration 1 | g03348168 |
Typical example |
(1) Tighten the studs to the following torque. ...
(2) Tighten the nuts to the following torque. ...
Refer to table 1 for the test pressure for the wastegate actuator (3)
Show/hide table
Engine kW | The pressure for the wastegate actuator |
90 to 152 kW | |
153 to 186 kW | |
The movement for the rod actuator ...
(4) Tighten the bolt to the following torque. ...
Show/hide table
Illustration 2 | g03348170 |
Typical example |
(5) ( 6) ( 7) Tighten the bolts to the following torque. ...
Show/hide table
Illustration 3 | g03348161 |
Typical example |
(8) Tighten the bolts that secure the exhaust elbow (if equipped) to the following torque. ...
Caterpillar Information System:
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Pressure Sensor
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Electronic Control Module (Engine) - Remove and Install
C175-16 Locomotive Engine Coolant Temperature Is Low
C175-16 Locomotive Engine Crankshaft - Remove and Install
C7.1 Industrial Engine Maintenance Interval Schedule
C175-16 Locomotive Engine Pistons, Liners, and Connecting Rods - Remove and Install
C280-16 Engine Engine Power Ratings
C7.1-XQ200 Rental Generator Set Refill Capacities
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install