Engine Power Ratings
The engine ratings are based in compliance with the following standard ambient air conditions of "SAE J1995 January 1990" and "ISO3046":
- Dry barometric pressure of
99 kPa (14.4 psi) - Temperature of
25° C (77° F)
Engine performance and fuel consumption are based on the following fuel specifications:
- The low heat value (LHV) of the fuel is 42780 Kj/kg at 29 °C.
- The density of the fuel is 838.9 g/L.
The following tolerances are included:
- ± 5 percent for specific fuel consumption
- ± 3 percent for brake kilowatts at the flywheel
The power at the flywheel is demonstrated at a Caterpillar Engine test cell.
Before engine power is derated, the maximum temperature of the inlet air to the turbocharger is
The engine ratings represent net power. The power that is required for the following parameters has been subtracted from the net power:
- Air filter restriction
- Exhaust restriction
- Fuel pump
- Pumps that circulate lube oil
- Water pumps
Caterpillar Information System:
C175-16 Locomotive Engine Pistons, Liners, and Connecting Rods - Remove and Install
C7.1 Engines for Caterpillar Built Machines Turbocharger
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Pressure Sensor
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Electronic Control Module (Engine) - Remove and Install
C175-16 Locomotive Engine Coolant Temperature Is Low
C7.1-XQ200 Rental Generator Set Refill Capacities
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C32 Marine Engines Flywheel Housing