Fuel Priming Pump - Remove and Install
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g03347977 - Disconnect hose assemblies (1). Disconnect harness assembly (2). Remove bolts (5). Remove fuel priming pump (4).
- Remove relief valve (3), if necessary.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install fuel priming pump (5) in the reverse order of removal.
- If relief valve (3) was removed, tighten relief valve (3) to a torque of
16.3 to 20.3 N·m (144.27 to 179.67 lb in) .
- If relief valve (3) was removed, tighten relief valve (3) to a torque of
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Caterpillar Information System:
C7.1-XQ200 Rental Generator Set Refill Capacities
C280-16 Engine Engine Power Ratings
C175-16 Locomotive Engine Pistons, Liners, and Connecting Rods - Remove and Install
C7.1 Engines for Caterpillar Built Machines Turbocharger
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Pressure Sensor
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C32 Marine Engines Flywheel Housing
C7.1 Industrial Engine Refill Capacities
C32 Marine Engines Water Manifold - Exhaust