Electronic Control Module (Engine) - Remove and Install
- Remove bolts (1) and remove cover (2).
Show/hide table
Illustration 2 g03318355 - Remove bolts (3), disconnect harness assemblies (5) and (6), and remove electronic control module (4).
Show/hide table
| |
| Illustration 1 | g03347757 |
- Install electronic control module (4) in the reverse order of removal.
- Tighten the connectors for harness assemblies (5) and (6) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
- Tighten the connectors for harness assemblies (5) and (6) to a torque of
Caterpillar Information System:
C175-16 Locomotive Engine Coolant Temperature Is Low
C175-16 Locomotive Engine Crankshaft - Remove and Install
C7.1 Industrial Engine Maintenance Interval Schedule
C32 Marine Engines Auxiliary Water Pump - Sea water
C32 Marine Engines Cylinder Head Valves
C32 Marine Engines Aftercooler
C27 and C32 Tier 4 Final Marine Engines Turbocharger
C32 Marine Engines Piston and Rings
C280-16 Engine Coolant - Change
C18 Locomotive Engine Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications
C280-16 Engine Engine Oil Temperature Regulator - Replace
C280-16 Engine Engine Oil Filter - Change
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Pressure Sensor
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install
C7.1 Engines for Caterpillar Built Machines Turbocharger
C175-16 Locomotive Engine Pistons, Liners, and Connecting Rods - Remove and Install
C280-16 Engine Engine Power Ratings
C7.1-XQ200 Rental Generator Set Refill Capacities