NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Drain the coolant from the cooling system into a suitable container for storage or disposal. The capacity of the cooling system is approximately
- Remove oil filters (1).
Show/hide table
Illustration 2 g00819153 - Cut cable ties (4).
- Remove bolts (3).
- Remove oil pan plate (2).
Show/hide table
Illustration 3 g00819219 - Remove bolts (5) and washers.
Show/hide table
Illustration 4 g00819256 - Remove bolts (6) and washers.
Show/hide table
Illustration 5 g00819382 - Remove bolts (7) and washers.
- Remove bracket (8) and base assembly (8A).
Show/hide table
Illustration 6 g00819269 - Remove bolts (10) and washers.
- Remove retainers (9).
Show/hide table
Illustration 7 g00819280 - Remove bolts (11) and washers.
- Remove elbow (12).
Show/hide table
Illustration 8 g00819281 - Remove bolt (15) , the washer, and the spacer.
- Loosen bolt (13).
- Lower rod (14).
Show/hide table
Illustration 9 g00819330 - Remove bolts (16) and washers.
- Remove bolts (17) and washers.
- Remove bracket (18).
Show/hide table
Illustration 10 g00819333 - Loosen clamp (19).
- Remove bolts (20) and washers.
- Remove bolts (21).
- Move elbow (22) aside.
Show/hide table
Illustration 11 g00819337 - Remove nuts (23), washers, and spacers.
- Remove bracket (24).
Illustration 1 | g00819146 |