Unit Injector Hydraulic Pump - Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
- Install unit injector hydraulic pump (21) with washers and bolts (20).
Show/hide table
Illustration 2 g00819165 - Install bolt (17).
- Install support (19) with washers and bolts (18).
Show/hide table
Illustration 3 g00819160 - Connect harnesses (15), (14), and (13).
- Install new cable ties (16).
- Connect hose assembly (12).
- Connect tube assembly (11).
Show/hide table
Illustration 4 g00819158 - Place brackets (8) in position.
- Install washers and bolts (10).
- Install washers and bolts (7).
- Install tube assembly (9).
Show/hide table
Illustration 5 g00819157 - Install clamp (6) with the washer and bolt (5).
Show/hide table
Illustration 6 g00819153 - Install oil pan plate (2) with bolts (3).
- Install new cable ties (4).
Show/hide table
Illustration 7 g00819146 - Install oil filter (1).
Show/hide table
Illustration 1 | g00819166 |
End By:
- Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove and Install".
Caterpillar Information System:
966G Series II Wheel Loader and 972G Series II Wheel Loader Power Train MID 081 - CID 0149 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Power Train MID 081 - CID 0149 - FMI 05
3176C and 3196 Engines For Caterpillar Built Machines Pistons and Connecting Rods - Assemble
D3G, D4G and D5G Track-Type Tractors Ripper Linkage and Cylinder Bearings - Lubricate
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train Transmission Hydraulic Control Operation
D10R Track-Type Tractor Engine Supplement Unit Injector Hydraulic Pump - Remove
2001/08/20 Correction to Systems Operation and Testing and Adjusting, RENR4341, "525B Wheel Skidder and 535B Wheel Skidder Braking System" , "Service Brake System Pressure - Test" {4250}
D10R Track-Type Tractor Engine Supplement Fuel Transfer Pump - Remove and Install
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train Transmission Hydraulic Control
631G and 637G Wheel Tractor-Scrapers Machine Systems Gear Pump (Hydraulic and Steering) - Remove
3406E Engine Supplement for 621G, 623G, and 627G Wheel Tractor Air Cleaner - Remove and Install
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train Torque Converter
631G and 637G Wheel Tractor-Scrapers Machine Systems Main Control Valve - Install
D7R Series II Track-Type Tractor Engine Supplement Fuel Transfer Pump - Remove and Install
D10R Track-Type Tractor Engine Supplement Engine Oil Filter Base - Remove
D7R Series II Track-Type Tractor Engine Supplement Engine Oil Filter Base - Disassemble
631G and 637G Wheel Tractor-Scrapers Machine Systems Gear Pump (Hydraulic and Steering) - Install
D7R Series II Track-Type Tractor Engine Supplement Primary Fuel Filter and Base - Remove and Install
D7R Series II Track-Type Tractor Engine Supplement Water Pump - Remove
D7R Track-Type Tractor Machine Systems Ripper Frame - Remove and Install
2001/08/20 Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
3046 Engine for Caterpillar Built Machines Cooling System - Test
2001/10/01 Improved Support for the Air Conditioner Compressor {7320}
3046 Engine for Caterpillar Built Machines Electric Starting System - Test