Ripper Control Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the ripper control valve.
- Remove eight bolts (1) and four housings (2) from the valve body.
Note: There will be slight spring pressure when housings (2) are removed.
Show/hide table
Illustration 1 | g00558189 |
- Remove four O-ring seals (3) from housings (2) .
Show/hide table
Illustration 2 | g00558190 |
- Remove two valve assemblies (4) from the valve body.
Show/hide table
Illustration 3 | g00558191 |
- Remove bolt (5), two washers (6), retainer (7), spring (8) and retainer (7) from valve stem (9) .
Show/hide table
Illustration 4 | g00558192 |
Show/hide table
Illustration 5 | g00558193 |
- Remove two plugs (10) and the valve assemblies that are located behind the plugs from the valve body.
Show/hide table
Illustration 6 | g00558194 |
- Remove O-ring seal (13) from plug (10). Remove spring (12) from valve (11) .
Show/hide table
Illustration 7 | g00558195 |
- Remove plug (14) and the valve assembly that is located behind the plug from the valve body.
Show/hide table
Illustration 8 | g00558196 |
- Remove O-ring seal (17) from plug (14). Remove spring (16) from valve (15) .
Show/hide table
Illustration 9 | g00558197 |
- Remove four bolts (18) and cover (19). Remove the O-ring seal from the cover (19) .
Show/hide table
Illustration 10 | g00558198 |
Caterpillar Information System:
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Ripper Carriage (Beam) - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Evaporator Core - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Compressor - Remove and Install
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Machine Preparation for Troubleshooting
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Install
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Disassemble
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Assemble
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Remove
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Remove
D11R Track-Type Tractor Machine Systems Ripper Frame - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Track Arm - Install
D11R Track-Type Tractor Machine Systems Ripper Pin Puller Control Valve - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Pin Puller Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D11R Track-Type Tractor Machine Systems Seat - Remove and Install
953C Track-Type Loader Machine Systems Tilt Cylinder - Remove
D9R Track-Type Tractor Alternator Belt - Inspect/Adjust