Rollover Protective Structure (ROPS) - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 6V-6146 | Load Leveling Beam | 1 |
- Attach Tooling (A) and a suitable lifting device to the ROPS, as shown.
Show/hide table
 | |
| Illustration 1 | g00535480 |
- Remove handles (1) and mounting bolts (2) from each side of the ROPS.
Show/hide table
 | |
| Illustration 2 | g00535491 |
- Remove the ROPS from the machine. The weight of the ROPS is approximately 655 kg (1,441 lb).
Show/hide table
 | |
| Illustration 3 | g00535492 |
Installation Procedure
- Attach Tooling (A) and a suitable lifting device to the ROPS, as shown.
Show/hide table
| | |
| Illustration 4 | g00535480 |
- Install the ROPS to the machine. The weight of the ROPS is approximately 655 kg (1,441 lb).
Show/hide table
| | |
| Illustration 5 | g00535492 |
- Install handles (1) and mounting bolts (2) to each side of the ROPS. Tighten bolts (2) to a torque of 1300 ± 151 N·m (958 ± 111 lb ft).
Show/hide table
| | |
| Illustration 6 | g00535491 |
Caterpillar Information System:
D11R Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Pin Puller Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Pin Puller Control Valve - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Track Arm - Install
D11R Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Frame - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Remove
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Ripper Carriage (Beam) - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Evaporator Core - Remove and Install
D11R Track-Type Tractor Machine Systems Seat - Remove and Install
953C Track-Type Loader Machine Systems Tilt Cylinder - Remove
D9R Track-Type Tractor Alternator Belt - Inspect/Adjust
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Track Arm Bearings - Remove and Install
627F Wheel Tractor-Scraper Suction Screen (Transmission Scavenge) - Clean
D11R Carrydozer Track-Type Tractor Bulldozer - Install
D11R Carrydozer Track-Type Tractor Bulldozer - Remove
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Disassemble
637E Series II Wheel Tractor-Scrapers Gauges
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Install
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Remove