Ripper Frame - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-7640     | Stand     | 3     |
8S-7621 | Tube     | 3     | |
8S-7615 | Pin     | 3     | |
B     | 4C-9633     | Puller Stud     | 1     |
8S-6587 | Adapter     |     | |
5P-8677 | Adapter     | 1     | |
9U-6833 | Nut     | 1     | |
6V-3160 | Double Acting Cylinder     | 1     | |
1B-4209 | Full Nut     | 2     | |
3H-0468 | Puller Plate     | 4     | |
1H-3108 | Push-Puller Leg     | 2     | |
5B-4807 | Rubber Molding     | 2     | |
3S-6224 | Electric Hydraulic Pump Gp     | 1     | |
C     | 9S-5561     | Pin Driver Cap     | 1     |
D     | 138-7574     | Link Bracket     | 2     |
E     | 138-7575     | Link Bracket     | 2     |
Start By:
- Remove the ripper tilt cylinders. Refer to Disassembly and Assembly, "Ripper Tilt Cylinder -Remove and Install".
- Remove the ripper carriage. Refer to Disassembly and Assembly, "Ripper Carriage (Beam) - Remove and Install".
Note: Tooling (A) is positioned under the ripper frame during the removal of the ripper carriage.
- Remove clamps (1), (2), and (3) that hold the hose assemblies to the ripper frame assembly.
Show/hide table
Illustration 1 | g00538633 |
- Attach Tooling (E) to transmission guard (4). Remove bolts (5) and remove the transmission guard. The weight of transmission guard (4) is approximately 400 kg (880 lb).
Show/hide table
Illustration 2 | g00538636 |
- Attach Tooling (D) to ripper frame (6), as shown.
Show/hide table
Illustration 3 | g00538637 |
- Remove bolts (8) and retainer (9) from pins (7) .
Show/hide table
Illustration 4 | g00538659 |
- Install Tooling (B) to pins (7). Remove pins (7) and the shims.
Show/hide table
Illustration 5 | g00538661 |
- Remove ripper frame (6) from the machine. The weight of ripper frame (6) is approximately 2869 kg (6,320 lb).
Installation Procedure
- Install ripper frame (6) to the machine. The weight of ripper frame (6) is approximately 2869 kg (6,320 lb).
Show/hide table
Illustration 6 | g00538661 |
- Install the shims and install pins (7) .
- Install retainer (9) and bolts (8) to pins (7) .
Show/hide table
Illustration 7 | g00538659 |
- Remove Tooling (D) from ripper frame (6) .
Show/hide table
Illustration 8 | g00538637 |
- Install transmission guard (4) and bolts (5). The weight of transmission guard (4) is approximately 400 kg (880 lb). Remove Tooling (E) from the transmission guard.
Show/hide table
Illustration 9 | g00538636 |
- Install clamps (1), (2) and (3) that hold the hose assemblies to the ripper frame assembly.
Show/hide table
Illustration 10 | g00538633 |
End By:
- Install the ripper carriage. Refer to Disassembly and Assembly, "Ripper Carriage (Beam) - Remove and Install".
- Install the ripper tilt cylinders. Refer to Disassembly and Assembly, "Ripper Tilt Cylinder -Remove and Install".
Caterpillar Information System:
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Remove
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Ripper Carriage (Beam) - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Evaporator Core - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Compressor - Remove and Install
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Machine Preparation for Troubleshooting
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Install
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Disassemble
D11R Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Track Arm - Install
D11R Track-Type Tractor Machine Systems Ripper Pin Puller Control Valve - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Pin Puller Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D11R Track-Type Tractor Machine Systems Seat - Remove and Install
953C Track-Type Loader Machine Systems Tilt Cylinder - Remove
D9R Track-Type Tractor Alternator Belt - Inspect/Adjust
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Track Arm Bearings - Remove and Install
627F Wheel Tractor-Scraper Suction Screen (Transmission Scavenge) - Clean
D11R Carrydozer Track-Type Tractor Bulldozer - Install