Quick-Drop Valve - Install
Installation Procedure
- Check the condition of all the O-ring seals in the hose assemblies and tube assemblies that are connected to the bulldozer quick-drop valve. If any of the seals are worn or damaged, use new parts for replacement.
- Position bulldozer quick-drop valve (4) on the cylinder. Install bolts (5). Tighten the bolts to a torque of 160 ± 6 N·m (120 ± 4 lb ft).
Show/hide table
Illustration 1 | g00558150 |
- Connect tube assembly (6) to the bulldozer quick-drop valve. Tighten the bolts that hold tube assembly (6) to a torque of 80 ± 4 N·m (60 ± 3 lb ft).
- Connect oil lines (3) to the bulldozer quick-drop valve.
- Install lamp assembly (1) and bolts (2) .
Show/hide table
Illustration 2 | g00558149 |
Note: Refer to the Operation and Maintenance Manual for all fluid capacities and the proper filling procedures.
Caterpillar Information System:
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Disassemble
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Assemble
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Remove
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Install
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Pilot Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Overspeed Controller Valve - Disassemble
D11R Track-Type Tractor Machine Systems Overspeed Controller Valve - Assemble
D11R Track-Type Tractor Machine Systems Implement Pump - Remove
D11R Track-Type Tractor Machine Systems Implement Pump - Install
D11R Track-Type Tractor Machine Systems Implement Pump - Disassemble
D11R Track-Type Tractor Machine Systems Implement Pump - Assemble
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Machine Preparation for Troubleshooting
D11R Track-Type Tractor Machine Systems Quick-Drop Valve - Remove
D11R Track-Type Tractor Machine Systems Refrigerant Compressor - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D11R Track-Type Tractor Machine Systems Refrigerant Evaporator Core - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Carriage (Beam) - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Assemble
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Disassemble
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Install
D11R Track-Type Tractor Machine Systems Ripper Control Valve - Remove
D11R Track-Type Tractor Machine Systems Ripper Frame - Remove and Install
D11R Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install