Water Temperature Regulator
Show/hide table
| |
| Illustration 1 | g00274459 |
Show/hide table
| Part Number | Start to Open Temperature | Fully Open Temperature | Minimum Opening Distance at Fully Open Temperature |
| 7C-3095 | |
|
|
| 4W-4794 | |
|
|
Caterpillar Information System:
2003/10/01 An Improved Alternator Belt is Used {1357}
C11, C13 and C15 On-highway Engines Maintenance Parameters
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062} Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062}
G3500B Engines Electronic Service Tools
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C11, C13, and C15 On-highway Engines California Emission Control Warranty Statement
G3520C and G3520E Generator Set Engines Engine Sensors
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Reference Material
G3520C and G3520E Generator Set Engines Integrated Temperature Sensing Module
SPP101 Skid Mounted Pumper Maintenance Interval Schedule
G3520B Engines Engine Overcrank
3500B and 3500C Marine Engines Engine Governing - Adjust
C3.3 Industrial Engine Cylinder Block - Inspect
SPP101 Skid Mounted Pumper Model View Illustrations
G3406 Engines Ignition Transformer
2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
SPP101 Skid Mounted Pumper Engine Crankcase Breather - Clean
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
C15 On-highway Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 On-highway Engine Inlet and Exhaust Valves - Remove and Install
C15 On-highway Engine Inlet and Exhaust Valve Guides - Remove and Install