Pistons and Connecting Rods - Disassemble
Show/hide table
| Alat yang Diperlukan | |||
| Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
| A | 4C-3601 | Expander Ring Piston | 1 |
| B | 5P-8639 | Pres Hidraulik | 1 |
| 8F-0024 | Rakitan Selang | 1 | |
| 1P-2375 | Coupler Penghubung | 1 | |
| 1P-2376 | Coupler Penghubung | 1 | |
| 5P-9725 | Silinder Hidraulik | 1 | |
| 5P-8651 | Spacer | 1 | |
| 5P-8649 | Adapter | 1 | |
| 5P-8650 | Adapter | 1 | |
Dimulai dengan:
- Lepaskan piston dan connecting rod. Rujuk ke Pembongkaran dan Perakitan, "Piston dan Connecting Rod - Pelepasan".
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Gunakan Peralatan (A) untuk melepaskan ring piston (1) dari piston (2).
- Lepaskan ring penahan (3).
Catatan: Penanganan yang hati-hati diperlukan untuk connecting rod yang retak. Permukaan yang retak untuk connecting rod dan tutup connecting rod tidak boleh ditempatkan pada permukaan apa pun. Connecting rod dan tutup connecting rod harus ditempatkan di samping untuk mencegah kerusakan. Bila mungkin, connecting rod dan tutup connecting rod harus dibautkan secara bersama untuk mencegah kerusakan.
- Lepaskan pin piston (6) dan piston (2) dari connecting rod (5).
Show/hide table
PERHATIAN Connecting rod harus dipanaskan untuk pemasangan bearing pin piston. Jangan gunakan alat las (torch).
- Tingkatkan temperatur connecting rod (5) di Area yang diindikasikan (X). Jarak maksimum Area (X) adalah
85.0 mm (3.35 inch) . - Gunakan Peralatan (B) untuk melepaskan bearing lama (4) dan pasang bearing baru (4) secara bersamaan. Lihat Spesifikasi, "Connecting Rod".
Show/hide table
| |
| Ilustrasi 1 | g01319591 |
Show/hide table
| |
| Ilustrasi 2 | g01142147 |
Caterpillar Information System:
C11, C13, and C15 On-highway Engines California Emission Control Warranty Statement
G3520C and G3520E Generator Set Engines Engine Sensors
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Reference Material
G3520C and G3520E Generator Set Engines Integrated Temperature Sensing Module
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C11, C13, and C15 On-highway Engines Federal Emission Control Warranty
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
G3520C and G3520E Generator Set Engines Engine Governing
C11 and C13 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C11 and C13 Engines Lifter Group - Remove and Install
G3500B Engines Electronic Service Tools
Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062} Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062}
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11, C13 and C15 On-highway Engines Maintenance Parameters
2003/10/01 An Improved Alternator Belt is Used {1357}
G3406 Engines Water Temperature Regulator
SPP101 Skid Mounted Pumper Maintenance Interval Schedule
G3520B Engines Engine Overcrank
3500B and 3500C Marine Engines Engine Governing - Adjust
C3.3 Industrial Engine Cylinder Block - Inspect
SPP101 Skid Mounted Pumper Model View Illustrations