Cylinder Block - Inspect
- 检查缸体有无裂纹和损坏。
- 不能加工缸体顶面。这会影响活塞高于缸体的高度。
- 检查凸轮轴轴承是否磨损。如果需要一个新轴承，使用适当的接头将轴承压出轴承孔。确保新轴承中的油孔朝向缸体前部。轴承中的油孔必须与缸体中的油孔对齐。轴承必须与凹进面对齐。请参阅解体和组装, "凸轮轴 - 拆卸和安装"。
Caterpillar Information System:
3500B and 3500C Marine Engines Engine Governing - Adjust
G3520B Engines Engine Overcrank
SPP101 Skid Mounted Pumper Maintenance Interval Schedule
G3406 Engines Water Temperature Regulator
2003/10/01 An Improved Alternator Belt is Used {1357}
C11, C13 and C15 On-highway Engines Maintenance Parameters
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062} Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062}
G3500B Engines Electronic Service Tools
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C11, C13, and C15 On-highway Engines California Emission Control Warranty Statement
SPP101 Skid Mounted Pumper Model View Illustrations
G3406 Engines Ignition Transformer
2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
SPP101 Skid Mounted Pumper Engine Crankcase Breather - Clean
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
C15 On-highway Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 On-highway Engine Inlet and Exhaust Valves - Remove and Install
C15 On-highway Engine Inlet and Exhaust Valve Guides - Remove and Install
C11 and C13 Engines Crankshaft - Install
C11 and C13 Engines Engine Oil Cooler - Remove
C11 and C13 Engines Diverter Valve (Coolant) - Remove
2003/12/01 SOLAS Requirements for Fuel Lines {1274}