Pistons and Connecting Rods - Remove
Dimulai dengan:
- Lepaskan cylinder head. Rujuk ke Pembongkaran dan Perakitan, "Cylinder Head - Pelepasan".
- Lepaskan jet pendingin piston. Rujuk ke Pembongkaran dan Perakitan, "Jet Pendingin Piston - Pelepasan dan Pemasangan".
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Pasang tanda identifikasi pada connecting rod (1) dan pada tutup connecting rod (3). Nomor tersebut harus sesuai dengan nomor silinder. Takik penahan bearing harus berada di sisi kanan.
- Lepaskan baut tutup connecting rod (4) dan tutup connecting rod (3). Lepaskan separuh bagian bawah bearing connecting rod (2) dari tutup connecting rod (3).
- Dorong piston dan connecting rod (1) menjauh dari crankshaft. Lepaskan separuh bagian atas bearing connecting rod (2).
Catatan: Penanganan yang hati-hati diperlukan untuk connecting rod yang retak. Permukaan yang retak untuk connecting rod dan tutup connecting rod tidak boleh ditempatkan pada permukaan apa pun. Connecting rod dan tutup connecting rod harus ditempatkan di samping untuk mencegah kerusakan. Bila mungkin, connecting rod dan tutup connecting rod harus dibautkan secara bersama untuk mencegah kerusakan.
- Lepaskan piston dan connecting rod (1) dari blok silinder.
Show/hide table
| |
| Ilustrasi 1 | g01319419 |
Caterpillar Information System:
C11, C13, and C15 On-highway Engines Federal Emission Control Warranty
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
G3520C and G3520E Generator Set Engines Engine Governing
C11 and C13 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
C11 and C13 Engines Lifter Group - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Install
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Plate Locations and Film Locations
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Model View Illustrations
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Safety Messages
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Cylinder Liner - Remove
G3520C and G3520E Generator Set Engines Integrated Temperature Sensing Module
3408C and 3412C Marine Auxiliary and Marine Generator Set Engines Reference Material
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
G3520C and G3520E Generator Set Engines Engine Sensors
C11, C13, and C15 On-highway Engines California Emission Control Warranty Statement
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3500B Engines Electronic Service Tools
Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062} Instructions for Installation of the 240-5916 Repair Kit (Muffler Clamp) {1062}
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11, C13 and C15 On-highway Engines Maintenance Parameters
2003/10/01 An Improved Alternator Belt is Used {1357}