Valve Seat Inserts
Usage:
Remove And Install Valve Seat Inserts
Start By:
a. remove valves
1. Use tooling (A) to remove the valve seat inserts from the cylinder head.
NOTE: The following steps are for the installation of the valve seat inserts.
2. Clean and remove any rough places (burrs) from the valve seat bores.
NOTE: For reconditioning information of the cylinder head, see SERVICE TRAINING MEETING GUIDE Form SESV1202.
3. Lower the temperature of (freeze) the new valve seat inserts. Use tooling (A) to install the new valve seat inserts. Do not increase the diameter of the extractor in the valve seat insert when the insert is installed in the cylinder head.
End By:
a. install valves
Caterpillar Information System:
3306 VEHICULAR ENGINE Valve Guides
3306 VEHICULAR ENGINE Valves
3306 VEHICULAR ENGINE Valve Lifters
3306 VEHICULAR ENGINE Cylinder Head And Spacer Plate
3306 VEHICULAR ENGINE Rocker Shaft
3306 VEHICULAR ENGINE Rocker Shaft And Push Rods
3306 VEHICULAR ENGINE Valve Cover
3306 VEHICULAR ENGINE Aftercooler
3306 VEHICULAR ENGINE Turbocharger
3306 VEHICULAR ENGINE Turbocharger
3306 VEHICULAR ENGINE Exhaust Manifold
3306 VEHICULAR ENGINE Engine Oil Cooler
3306 VEHICULAR ENGINE Water Directors
3306 VEHICULAR ENGINE Pistons
3306 VEHICULAR ENGINE Cylinder Liners
3306 VEHICULAR ENGINE Fan And Fan Drive
3306 VEHICULAR ENGINE Fan Drive
3306 VEHICULAR ENGINE Crankshaft Main Bearings
3306 VEHICULAR ENGINE Connecting Rod Bearings
3306 VEHICULAR ENGINE Air Compressor
3306 VEHICULAR ENGINE Air Compressor Governor
3306 VEHICULAR ENGINE Crankshaft Front Seal And Wear Sleeve
3306 VEHICULAR ENGINE Crankshaft Damper And Pulley
3306 VEHICULAR ENGINE Engine Front Support