3034 Marine Engine Caterpillar

Model View Illustrations

Usage:

3034 CPP

The model views show a typical arrangement for a naturally aspirated 3034 Marine engine. Due to individual applications, your engine may appear different from the illustrations.

Show/hide table




Illustration 1	g00792768
Right side of the 3034 Marine engine (1) Jacket water pump (2) Alternator (3) Expansion tank and water cooled exhaust manifold (4) Heat exchanger (5) Fuses (6) Connection for the sea water inlet (7) Gear selector for the marine transmission (8) Crankshaft pulley (9) Engine mounting bracket (10) Flexible engine mount (11) Auxiliary water pump (12) Supply for the domestic water heater (13) Electric starting motor

Show/hide table




Illustration 2	g00792769
Left side of the 3034 Marine engine (14) Engine lifting eye (15) Air cleaner (16) Oil fill cap (17) Glow plug (18) Water cooled exhaust manifold (19) Return for the domestic water heater (20) Marine transmission oil cooler (21) Fuel injection pump (22) Inlet manifold (23) Fuel shutoff solenoid (24) Fuel transfer pump (25) Manual sump pump for removing the engine oil (26) Marine transmission (27) Engine oil pump (28) Fuel filter (29) Ground connection (30) Engine oil pressure sensor

Caterpillar Information System:

3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Potentiometers

3406E Generator Set Engines Starting the Engine

3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Indicators

Electronic Modular Control Panel II+ (EMCP II+) EMCP Electronic Control (Generator Set)

Air Conditioning and Heating R134a for All Caterpillar Machines Electronic Heat Control - Test

Product Identification Numbers (PIN) Location Guide Ripper

Product Identification Numbers (PIN) Location Guide Bulldozer

Electronic Modular Control Panel II+ (EMCP II+) Data Link

3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Solenoids

3412C Engine Inlet and Exhaust Valves - Remove and Install

XQ300, XQ400 Rental Generator Sets Control Panel

2001/05/01 A New Special Instruction, REHS1026-00, "Installation And Callibration Of The 144-0441 Tachometer " Is Available {7462, 7462}

3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Sensors

3606, 3608, 3612, 3616 and 3618 Engines Tachometer General Information

3412C Engine Flywheel - Install

G3600 Engines Emergency Stopping

Electronic Modular Control Panel II+ (EMCP II+) Service Mode

3412C Engine Flywheel - Remove

3034 Marine Engine Alternator Belt - Inspect/Adjust/Replace

Electronic Modular Control Panel II+ (EMCP II+) Modes Of Operation

3412C Engine Cylinder Head - Install

Electronic Modular Control Panel II+ (EMCP II+) Engine/Generator Programming OP5-0

Electronic Modular Control Panel II+ (EMCP II+) Normal Mode

3034 Marine Engine Cooling System Coolant (DEAC) - Change