C13, C15, and C18 Tier 4 Final Engines Caterpillar


Fuel Manifold (ARD)

Usage:

826K 232



图 1g03367008

表 1
344-0390 燃油歧管总成 的技术规格    
项目     数量     零件     技术规格说明    
1     2     331-9208 电磁阀总成     拧紧至扭矩为
50 ± 5 N·m (37 ± 4 lb ft)。    
2     2     -     将螺母拧紧至扭矩为
20.0 ± 2.5 N·m (177.0 ± 22.1 lb in)。    
3     1     298-6488 压力传感器总成     拧紧至扭矩为
30 ± 3 N·m (266 ± 27 lb in)。    
4     1     284-2728 压力传感器总成     拧紧至扭矩为
30 ± 3 N·m (266 ± 27 lb in)。    
5     1     341-3150 滤清器接头组件     拧紧至扭矩为
30 ± 3 N·m (266 ± 27 lb in)。    
6     1     307-6195 适配器组件     拧紧至扭矩为
17.0 ± 1.5 N·m (150.5 ± 13.3 lb in)。    
7     1     321-8675 接头组件     拧紧至扭矩为
17.0 ± 1.5 N·m (150.5 ± 13.3 lb in)。    
8     1     6V-9829 盖组件     拧紧至扭矩为
7.0 ± 2.5 N·m (62.0 ± 22.1 lb in)。    

Caterpillar Information System:

C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
330C Forest Machine Machine System Specifications Track
325D and 329D Excavators Machine System Specifications Travel Counterbalance Valve
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Guard
330D and 336D Excavators Machine System Specifications Hydraulic Generator
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
301.4C Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Assemble
2011/08/10 An Improved Support Plate Is Now Used On Certain SW60 Wheel Saws {6712}
301.4C Mini Hydraulic Excavator Relief Valve - Test and Adjust - Pilot
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.