325D and 329D Excavators Machine System Specifications Caterpillar


Travel Counterbalance Valve

Usage:

325D L AZP


Illustration 1g02646299

Table 1
Specification for 360-4598 Travel Counterbalance Valve Gp 
Item  Qty  Part  Specification Description 
7Y-8437 Nut  Torque to 92.2 ± 8.3 N·m (68.0 ± 6.1 lb ft)
360-4599 Relief Valve Gp  Torque to 540 ± 50 N·m (398 ± 37 lb ft)
9S-8004 O-Ring Plug  Torque to 31.4 ± 2.9 N·m (277.9 ± 25.7 lb in)
8T-7811 Bolt  Torque to 78.5 ± 7.9 N·m (57.9 ± 5.8 lb ft)
209-5920 Spring  Length under test force is 62.0 mm (2.44 inch).
Test force is 681.8 ± 68.2 N (153.8 ± 15.3 lb).
Free length after test is 85.0 mm (3.35 inch)
Apply red Loctite 272 to the threads of the spool. 

Caterpillar Information System:

330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Guard
330D and 336D Excavators Machine System Specifications Hydraulic Generator
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Install
330C Forest Machine Machine System Specifications Track
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
301.4C Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.