Hydraulic Generator
Show/hide table
 | |
| Illustration 1 | g02646278 |
Top view | |
Show/hide table
| Specification for 308-0147 Hydraulic Generator Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 7X-0346 Bolt | Torque to 150 ± 25 N·m (111 ± 18 lb ft). |
Show/hide table
 | |
| Illustration 2 | g02646279 |
Show/hide table
| Specification for 308-0147 Hydraulic Generator Gp | |||
| Item | Qty | Part | Specification Description |
| 2 | 2 | - | Final Installation torque for the setscrews to 22 ± 2 N·m (195 ± 18 lb in). |
| 3 | 1 | - | Final Installation torque for the clamp bolt to 34 ± 3 N·m (301 ± 27 lb in). |
| 4 | 4 | 8T-4910 Bolt | Torque to 22 ± 2 N·m (195 ± 18 lb in). |
Caterpillar Information System:
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Wear Plates - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Guard
325D and 329D Excavators Machine System Specifications Travel Counterbalance Valve
330C Forest Machine Machine System Specifications Track
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
301.4C Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}