Exhaust Sensor and Lines (NRS)
Show/hide table
Illustration 1 | g02701456 |
Show/hide table
Specification for 345-9019 Air Lines Gp, 343-0620 Air Lines Gp, and 380-8504 Air Lines Gp | |||
Item | Qty | Part | Specification Description |
A | - | - | Angle for clamp assembly is 90 ± 15 degrees. |
1 | 1 | 9N-5085 Clamp | Torque to |
Do not reuse hose (2) and band clamp (3). Replace with new hose and new band clamp if removed for service. |
Show/hide table
Illustration 2 | g02701457 |
Show/hide table
Specification for 345-9019 Air Lines Gp, 343-0620 Air Lines Gp, and 380-8504 Air Lines Gp | |||
Item | Qty | Part | Specification Description |
B | - | - | Angle for clamp assembly is 60 ± 15 degrees. |
Caterpillar Information System:
330C Forest Machine Machine System Specifications Track
325D and 329D Excavators Machine System Specifications Travel Counterbalance Valve
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Guard
330D and 336D Excavators Machine System Specifications Hydraulic Generator
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
301.4C Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Assemble
2011/08/10 An Improved Support Plate Is Now Used On Certain SW60 Wheel Saws {6712}
301.4C Mini Hydraulic Excavator Relief Valve - Test and Adjust - Pilot