Track
Show/hide table
Illustration 1 | g03354619 |
(1) Standard pin
(2) Master pin |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
- | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
- | - | - | Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 2. Tighten the bolts to an extra 120 ± 5 degrees. |
- | - | - | The maximum assembly force for the link assembly is |
- | - | - | The assembly force for the master pin is |
A | - | - | Protrusion for the master bushing is |
B | - | - | Distance between the bolt holes is |
C | - | - | Distance between the bolt holes is |
D | - | - | Protrusion for each end of the standard bushing |
E | - | - | Protrusion at one end of the standard pin |
F | - | - | Protrusion at one end of the standard master pin |
Caterpillar Information System:
325D and 329D Excavators Machine System Specifications Travel Counterbalance Valve
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Travel Motor Guard
330D and 336D Excavators Machine System Specifications Hydraulic Generator
320E RR Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Disassemble
320E RR Excavator Hydraulic System Relief Valve (Crossover) - Test and Adjust
Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620} Intake Manifold Pressure Shown Incorrectly in the Monitor Display of Certain Wheeled Excavators{7490, 7601, 7620}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve - Remove
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
301.4C Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Assemble
2011/08/10 An Improved Support Plate Is Now Used On Certain SW60 Wheel Saws {6712}