General Information
Show/hide table
Illustration 1 | g00886476 |
Show/hide table
Illustration 2 | g00886480 |
Show/hide table
Illustration 3 | g00886483 |
Show/hide table
Illustration 4 | g00886487 |
Show/hide table
Illustration 5 | g00886495 |
The machine electronic control system electronically controls several functions. The system consists of the machine electronic control module, various switches, sensors, solenoids and alarms. The machine ECM receives input from various switches, sensors, the engine ECM, and the EMS via the CAT data link. This input information is processed by the machine ECM, which then activates the appropriate output or outputs.
The machine ECM controls the following functions:
- Bucket Dump
- Swing Brake
- Travel Brake
- Autolube (Attachment)
- Manual Lube (Attachment)
- Grease Reel (Attachment)
- Hydraulic Demand Fan
- Two Speed Track
- Cooler Blocker
- Travel Alarm
- AESC Control Line
- Pilot Lockout
- Starting System
- Prelubrication
- "Hammer/Shear"
- Worktool/Magnet
- Bucket Thumb
Caterpillar Information System:
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Manifold - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 2840 mm (111.8 inch)
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 4670 mm (183.9 inch)
307C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
307C Excavator Engine Supplement Muffler - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 3600 mm (141.7 inch)
307C Excavator Engine Supplement Radiator - Install
Vertical Wedge Lock Series SW Quick Coupler Daily Inspection
307C Excavator Engine Supplement Radiator - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Boom
325C Excavator Machine System Specifications Boom
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Boom - 7800 mm (307.1 inch)
304 CR Mini Hydraulic Excavator Hydraulic System Main Control Valve
3056E Industrial Engine Crankshaft
330C Excavator Specifications - Ultrahigh Demolition Configuration
330C Excavator Machine Systems Boom - Remove
5230 Excavator Hydraulic System Solenoid Valve (Swing Signal)
385B and 5090B Excavators Excavator Systems Bucket Linkage - Install
330C Excavator Specifications - Retrofit Boom
304 CR Mini Hydraulic Excavator Specifications
302.5 Mini Hydraulic Excavator Cab Door - If Equipped
330C Excavator Machine System Specifications Recoil Spring
330C Excavator Machine Systems Stick - Remove
307C Excavator Machine Systems Main Hydraulic Pump - Install