Boom
Show/hide table
Illustration 1 | g00593836 |
(A) Stick cylinder (B) Stick (C) Boom cylinder |
Note: All bores must be free of paint. Coat all bores for pins with lubricant.
(1) Lubricate the sealing lip slightly with the lubricant that is being sealed.
(2) 208-1922 Pin
- Diameter after plating ... 139.85 ± 0.04 mm (5.5059 ± 0.0016 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
- Diameter of Bore for pin ... 140.05 ± 0.05 mm (5.514 ± 0.002 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
(3) 149-9440 Pin Assembly
- Diameter after plating ... 139.850 ± 0.040 mm (5.5059 ± 0.0016 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
- Diameter of Bore for pin ... 140.050 ± 0.050 mm (5.5138 ± 0.0020 inch)
- Minimum thickness for plating ... 0.005 mm (0.0002 inch)
(4) Use the necessary shims to adjust the lateral clearance.
- Maximum clearance ... 0.800 mm (0.0315 inch)
- 093-0077 Shim thickness ... 1.0 mm (0.04 inch)
- 093-0109 Shim thickness ... 2.0 mm (0.08 inch)
- 158-3852 Shim thickness ... 0.5 mm (0.02 inch)
- 093-0077 Shim thickness ... 1.0 mm (0.04 inch)
(5) 158-4105 Pin Assembly
- Diameter after plating ... 129.850 ± 0.040 mm (5.1122 ± 0.0016 inch)
- Minimum thickness for plating ... 0.040 to 0.050 mm (0.0016 to 0.0020 inch)
- Diameter of Bore for pin ... 130.050 ± 0.050 mm (5.1201 ± 0.0020 inch)
- Minimum thickness for plating ... 0.040 to 0.050 mm (0.0016 to 0.0020 inch)
(6) Use the necessary shims to adjust the lateral clearance.
Caterpillar Information System:
325C Excavator Machine System Specifications Boom
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Boom - 7800 mm (307.1 inch)
318C and 319C Excavators Tool Control System System Schematic
325C Excavator Machine System Specifications Boom
307C Excavator Engine Supplement Valve Mechanism Cover - Remove and Install
5230 Excavator Hydraulic System Swing Hydraulic System
304 CR Mini Hydraulic Excavator Hydraulic System Pilot Hydraulic System
325C Excavator Machine System Specifications Boom
322C and 325C Forest Machines Hydraulic System Pilot Hydraulic System
385B and 5090B Excavators Excavator Systems Bucket Linkage - Remove
2002/11/04 A Seal Kit Is Available for the Service of the Swivel in the Hose Reel Group {7510, 7540}
325C Excavator Machine System Specifications Boom - Stub
307C Excavator Engine Supplement Radiator - Remove
Vertical Wedge Lock Series SW Quick Coupler Daily Inspection
307C Excavator Engine Supplement Radiator - Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 3600 mm (141.7 inch)
307C Excavator Engine Supplement Muffler - Remove and Install
307C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 4670 mm (183.9 inch)
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 2840 mm (111.8 inch)
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Manifold - Remove and Install
5110B Excavator Machine Electronic Control System General Information
304 CR Mini Hydraulic Excavator Hydraulic System Main Control Valve
3056E Industrial Engine Crankshaft