Muffler - Remove and Install
Removal Procedure
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Disconnect drain tube (2) from muffler assembly (1) .
Show/hide table
Illustration 1 | g00886328 |
- Remove bolts (4) from exhaust clamp (3). Remove clamp (3).
Show/hide table
Illustration 2 | g00886338 |
- Remove bolts (6) from mounting bracket (5) for muffler assembly (1). Repeat this procedure for the opposite side of muffler mounting bracket (5).
- Remove muffler assembly (1) and mounting brackets (5) .
Installation Procedure
- Position muffler mounting brackets (5) on the engine. Install bolts (6) .
Note: Use 5P-3931 Anti-Seize Compound on all threaded connections.
Show/hide table
Illustration 3 | g00886338 |
- Position muffler assembly (1) on the machine.
- Position clamp (3) and install bolts (4) .
- Connect drain tube (2) .
Show/hide table
Illustration 4 | g00886328 |
Caterpillar Information System:
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 3600 mm (141.7 inch)
307C Excavator Engine Supplement Radiator - Install
Vertical Wedge Lock Series SW Quick Coupler Daily Inspection
307C Excavator Engine Supplement Radiator - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Boom
325C Excavator Machine System Specifications Boom
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Boom - 7800 mm (307.1 inch)
318C and 319C Excavators Tool Control System System Schematic
325C Excavator Machine System Specifications Boom
307C Excavator Engine Supplement Valve Mechanism Cover - Remove and Install
5230 Excavator Hydraulic System Swing Hydraulic System
304 CR Mini Hydraulic Excavator Hydraulic System Pilot Hydraulic System
307C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 4670 mm (183.9 inch)
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 2840 mm (111.8 inch)
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Manifold - Remove and Install
5110B Excavator Machine Electronic Control System General Information
304 CR Mini Hydraulic Excavator Hydraulic System Main Control Valve
3056E Industrial Engine Crankshaft
330C Excavator Specifications - Ultrahigh Demolition Configuration
330C Excavator Machine Systems Boom - Remove
5230 Excavator Hydraulic System Solenoid Valve (Swing Signal)
385B and 5090B Excavators Excavator Systems Bucket Linkage - Install
330C Excavator Specifications - Retrofit Boom