365B, 365B Series II and 365BL Excavators Caterpillar


Window Wiper and Washer Control

Usage:

365B 9PZ

Excavator with Demolition Cab (If Equipped)

The top window of the demolition cab is equipped with one window wiper.




Illustration 1g00730651

Switch for window washer




Illustration 2g00741703

Neutral position - The window wiper is off.

Left position - Turn the switch left in order to activate the window wiper continuously.

Right position - Turn the switch right in order to operate the intermittent function with spray. When the switch is turned, the window wiper will operate intermittently at six second intervals. Washer fluid is sprayed on the window during operations.

Note: In any position, the switch may be depressed in order to spray window washer fluid on the window.

Caterpillar Information System:

330C Excavator Securing the Machine
320C U Excavator Leaving the Machine
C-9 Engines for Caterpillar Built Machines Compression Brake
307C Excavator Hydraulic System Gear Pump (Pilot) - Test
C-9 Engines for Caterpillar Built Machines Flywheel Housing
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Maximum Payload Speed Manager
320C Forest Machine Machine Systems Boom Cylinder - Assemble
320C Excavator Equipment Lowering with Engine Stopped
322C Excavator Machine Systems Stick Bearings and Seals - Remove
307C Excavator Window Wiper and Washer Control
330C Excavator Joystick Controls
2000/08/07 The Main Control Valve is Improved for Use with the "Bent Axis Travel Motor" {5051}
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket - Remove and Install
307C Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
C-9 Engines for Caterpillar Built Machines Water Pump - V-Belt Pulley
C-9 Engines for Caterpillar Built Machines Water Pump - Pulley for Serpentine Belt
307C Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Visual Inspection
307C Excavator Hydraulic System Gear Pump (Blade) - Test
M325B Material Handler Hydraulic System Pump Hydraulic System
320B, 320B L and 320B N Excavators Joystick Controls
5110B Excavator Undercarriage - Check
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket
BA22, BA25 and BA30 Angling Brooms Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.